| Author | Message | ||
     Jackbequick |
I have an almost new "CenterStand" Model BCS-1 work lift for tube frame Buells. This will work with all tube frame Buells, the CenterStand page this model lists it as for the M2, S1, S2, S3, and X1 and shows it in use. These are getting hard to find and I accidently acquired two of these. This one has been used once, the only signs of use are a few light scratches/scuffs on the area that rests on the concrete. It is complete with all parts and the original directions for use. This is a very good stand, plenty of metal and strength in it, well engineered, simple and safe to use. The handle is removable for easy transport and storage. This needs to be used on a hard level surface and only takes a few seconds to use. It picks the back tire up 2"-3" off the floor, and leaves the bike setting very solidly, stable, and level. With the bike on the CenterStand, a smaller jack, blocking, or a lifting device can be used to lift the front of the bike for front end work. This cost $130 new with shipping, for $120 I'll ship it UPS or FedEx ground to the continental U.S. Email me at jacker at midmaine dot com or use the Badweb email feature for more info. Jack | ||
| Firstbuell |
Sold!! I've been promising this very stand to my brother since last year, so please consider this a done deal.. Curt | ||
| Jackbequick |
"Sold!!" Wow! That was quick! PM sent, thanks. Jack |
