G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Rr100041 Posted on Thursday, September 01, 2005 - 01:14 pm:        will a post recall swingarm from a s2 or s1 or early s3 swingarm fit a rr-1000 without any modification or ride change besides the welding of the axel adjusting block tabs on the top and bottom . I had a problem with the sprocket bearing failing and letting the sprocket meet the swingarm (stop fast?!!! you don't want to know )   Firemanjim Posted on Thursday, September 01, 2005 - 07:55 pm:        Court,Josh,Dan,someone with older model experience chime in here!!!   Rr100041 Posted on Saturday, September 03, 2005 - 12:00 pm:        i think those guys retired or something   Aaomy Posted on Saturday, September 03, 2005 - 03:40 pm:        i cant really say,, but if you could post some good pictures of the current swing arm i may be able to help.. just a thought.. if you need measurements off a s2 stock steal swing arm i can give you those too.. hope some of this helps ,, aaomy   Buelliedan Posted on Sunday, September 04, 2005 - 12:16 pm:        I honestly don't know as I only have the RSs not the RR. Aaron might be able to answer but he will not do it on this board unfortunately.   Firemanjim Posted on Sunday, September 04, 2005 - 06:29 pm:        Eric,go over to Sacborg and ask.Aaron was just posting in the "Bonneville cancelled"thread.look here-- http://www.sacborg.com/ubb/ultimatebb.cgi?ubb=get_topic&f=1&t=013379

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: