G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Devdawg Posted on Thursday, July 07, 2005 - 08:01 pm:        I'm looking for mounting brackets for an M2 fly screen. Not sure if all flyscreens bolt patterns are exactly the same (I suspect they are), but I'll try X1, S1 or maybe blast mounts to see if they work.   Jst Posted on Friday, July 08, 2005 - 12:51 pm:        Are you looking for the L brackets or the ones going to the forks? May have a set in the garage. I'll check tonight.   Cowtown Posted on Friday, July 08, 2005 - 02:30 pm:        Take a look at this. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4560157409&ca tegory=35575   Bluzm2 Posted on Friday, July 08, 2005 - 03:43 pm:        Don't forget there was a change in the brackets in 2001. This was to make room for the tach...   Djkaplan Posted on Friday, July 08, 2005 - 04:00 pm:        I'm not exactly sure, but I think you need to use the old style flyscreen brackets with the old style headlight mount. If I recall correctly, the new style flyscreen mount is integral with the headlight mount.   Bluzm2 Posted on Friday, July 08, 2005 - 04:41 pm:        DJ, That's what I recall too..   Devdawg Posted on Friday, July 08, 2005 - 06:33 pm:        I have a '99 M2 so it's the old style (two part setup) with the L-brackets..but I'll take either type. I don't have a problem with replacing my old head light mount with the newer one piece if that's all that's avail.... The newer bracket may actually be a better fit since I have the tach and speedo dash. Thanks.... (Message edited by devdawg on July 08, 2005) (Message edited by devdawg on July 08, 2005)   Djkaplan Posted on Monday, July 11, 2005 - 02:32 pm:        Those are the old style headlight brackets, not the flyscreen mounts (they're shown upside down in the pic). The old style flyscreen mounts will accomodate a tachometer, btw. They also give you the option of taking the flyscreen off without leaving the mounts in place.   Jackbequick Posted on Monday, July 11, 2005 - 09:03 pm:        For what its worth, I added a tach to my 2000 M2 using a Buell factory tach kit. That came with a tach and dual instrument mounting bezel but all the other brackets (for the fly screen, etc.) were left as they were. I couldn't imagine figuring these engines out without a tach. I look at it more often than the speedo. Jack   Djkaplan Posted on Tuesday, July 12, 2005 - 12:42 pm:        This has to be the longest discussion of Buell flyscreen mounting brackets in internet history.   Devdawg Posted on Tuesday, July 12, 2005 - 05:52 pm:        Dj, LOL....I think you're right....

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: