G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Chasespeed Posted on Friday, June 17, 2005 - 04:08 pm:        Got a new timing cover, but.... My rivets are in the 9 and 3 o'clock postions, while the new cover, has them in the 12 and 6.... Someone tell me I am totally missing something.... HELP.... And if I am jsut retarded, what screws, and what material to seal it(hylomar, silicon etc) Thanx Chase   Daves Posted on Friday, June 17, 2005 - 04:18 pm:        What is the new timing cover for?   Buelliedan Posted on Friday, June 17, 2005 - 06:06 pm:        use allen head bolts instead of rivets. Just bolt it directly to the engine case now instead of rivets.   Chasespeed Posted on Friday, June 17, 2005 - 06:44 pm:        Ok, its on a 99 X1..... I woudl love to use bolts.... BUT, the stock rivets are on the left and right hand sides of the new cover.... The new cover has them on the top and bottom.... the new one is drilled 90* out from the orginal... follow me? Make more sense? Chase   Koz5150 Posted on Friday, June 17, 2005 - 07:14 pm:        Chase when you pull the old cover off, you will have a backing plate that is screwed to the engine. Those screws will be at 12 and 6 o'clock. When you install the new cover, just use the same holes. You can takc the screws to the hardware staore and replace them with stainless or chrome ones   Chasespeed Posted on Friday, June 17, 2005 - 07:36 pm:        So, drill the rivets.... Flimsy little cover comes off, backing plate behind.. remove backing plate..get new screws/bolts, Install new cover w/ out backing plate... Do I have this right????(I really need a darn service manual)... Thanx again Koz... Chase   Koz5150 Posted on Friday, June 17, 2005 - 07:39 pm:        I kept the backing plate inbetween the engine and timing cover, but it is your choice I believe there is a paper gasket in there too. Main thing, just drill the rivets. Be carefule you dont drill to deep into the engine.   Chasespeed Posted on Friday, June 17, 2005 - 07:45 pm:        OK, so I am retarded.... Thanx again.... Chase   Dale Posted on Friday, June 17, 2005 - 08:54 pm:        No gasket or sealer on an XB.   Typeone Posted on Friday, June 17, 2005 - 11:05 pm:        I just did this today with the American Sportbike kit from Al, already replaced the chin piece rivets a few weeks ago, nice little tap 'n all allen screws included as well. $15 bucks i think. Chase is already on his way but for anyone else who is in need, look for the 'rivet eliminator kit' on the American Sport Bike site. You could definitely get all the pieces at the hardware store but I liked that it was all in one bag for a decent price. Thanks, Al !   Koz5150 Posted on Saturday, June 18, 2005 - 08:41 pm:        So did you get it all figured out?   Chasespeed Posted on Sunday, June 19, 2005 - 09:53 am:        I am on my way to my buddy's house now to do it, and try to adjust the clutch, and/or determine if it needs to be changed..... He is a Sportster guru...so.... he is gonna help learn this primary... thanx guys... I will take pics...but I have no idea how to resize.... Chase

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: