G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through April 24, 2005 » Warning on Exhaust Emulator Circuit « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Thursday, April 21, 2005 - 01:36 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
The schematic I posted and sent out has the hook up to the ECM incorrectly documented. The Control line should be on the left side of the diagram and the Hall Effect line on the right. Also the text description is reversed as well. Both wires connect to pin #2 of each chip, but the Control wire goes to the diode.

xbolt12
Top of pagePrevious messageNext messageBottom of page Link to this message

Tommy_2stroke
Posted on Thursday, April 21, 2005 - 11:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
Sorry to be a pest, John, but where might I find that circuit? My new Drummer is on the way, so its time to start soldering...
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Thursday, April 21, 2005 - 01:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
You can leave the motor in and just disconnect the cable to the muffler if you are not modifying the airbox.

If you are, do a search on "Servo Emulator" on the XBoard and it's the Dec 31, 2004 post. I just added to that thread last night with an explanation regarding the error in the schematic and text.

xbolt12
Top of pagePrevious messageNext messageBottom of page Link to this message

Fullpower
Posted on Thursday, April 21, 2005 - 05:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
or try this: http://www.badweatherbikers.com/buell/messages/32777/90555.jpg
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbolt12
Posted on Friday, April 22, 2005 - 04:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
Yes, that is the schematic in error. It should say Control (ECM) on the left side (diode) and Hall Effect (ECM on the right....
Top of pagePrevious messageNext messageBottom of page Link to this message

Tommy_2stroke
Posted on Saturday, April 23, 2005 - 01:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)
Got it! Thanks very much.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration