| Author | Message | ||
     Ronlv |
has anyone changed their flasher so the lights will blink properly with leds what flasher did you get and where model# thanks, ron | ||
| Chainsaw |
You'll need a load equalizer to get them to flash properly. Try www.kuryakyn.com or www.jpcycles.com Maybe www.AmericanSportBike.com has them? | ||
| Andreyev |
Look up EL98N on this site: http://www.usaled.com/ I bought one that I haven't tested yet, but if it works like it's supposed to, you won't have to mess around with load equalizers and such. When I say I haven't tested it I mean I haven't put any LEDs in for turn signals yet. Haven't found any bright enough. I did install it on my bike and it works fine with regular bulbs. HTH | ||
| Ronlv |
did you replace your flasher relay with this unit or did you add this somehow? | ||
| Andreyev |
Replaced. The plug that plugs into the factory flasher relay has the wires in a different order than the electronic flasher, so I used a jewelry screwdriver to remove the wires/blade connectors from the plug and hooked them up to the new relay. I haven't cut any wires, and could easily return the bike to the stock setup in about 2 minutes. |
