Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Firemanjim
| Posted on Monday, March 21, 2005 - 12:01 am: |
|
OK,I am at a loss.These darn S-3's are not as easy as an S-2.I have S/A and mounting block on floor and have the isolator bushings off.How do I separate the S/A and block from here/The darn aluminum threaded pieces don't come right out like the ones on an S-2 with the homemade special tool to unscrew em. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bluzm2
| Posted on Monday, March 21, 2005 - 01:21 pm: |
|
Jim, They should unscrew just like the S2's. Probably some corrosion in there seizing things up. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Firemanjim
| Posted on Monday, March 21, 2005 - 10:34 pm: |
|
Brad,I can turn both sides,have tightened pinch bolt one side down and turned other side and vice versa???? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bluzm2
| Posted on Tuesday, March 22, 2005 - 12:47 am: |
|
Whoops, weird double post... (Message edited by bluzm2 on March 22, 2005) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bluzm2
| Posted on Tuesday, March 22, 2005 - 12:51 am: |
|
That doesn't sound good Jim, one side may be stripped. IAMike just did his S3, I'll shoot him a note. They should be the same as the M2 and X1. Brad BTW, do you have any spare S2 side plate bolts? I think I'm going to have to drill my left side off. I have broken 3 allen sockets and bent 2 wrenches. I suspect they are going to be hard to find without a special order.. I cant get any of the three loose! Right side was no problem. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Court
| Posted on Tuesday, March 22, 2005 - 04:33 am: |
|
If ya can't find the bolts, let me know. I'll see if I can bring them next Saturday night. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Iamike
| Posted on Tuesday, March 22, 2005 - 08:09 am: |
|
Jim, Does yours have the long bolt between the bushings? After I took that out and loosened the pinch bolts the bushings came right out. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bluzm2
| Posted on Tuesday, March 22, 2005 - 11:01 am: |
|
Court, Did you get my email from 2 weeks ago? Me thinks not.... Think I better resend.... |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Firemanjim
| Posted on Tuesday, March 22, 2005 - 10:22 pm: |
|
Brad,take a brass drift and smack those bolts hard.Should shake corrosion loose.Always worked for me.I also use an impact wrench(type you hit with a hammer) and a good quality bit.And you can always hit it in the opposite direction to break loose. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Al_lighton
| Posted on Tuesday, March 22, 2005 - 10:24 pm: |
|
I may be wrong, but I think all S3's had the long bolt. The 96 S1's had the slotted pre-load "nuts" that threaded to the center piece to set the bearing preload from each side. But I THINK all 97's, but KNOW all 98's and later have the long bolt. Jim, peer down in the center of those with a flashlight, you'll see an allen head hex on one side. Tighten the pinch bolt on the OTHER side, then use an allen wrench to unscrew the allen bolt. Al |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Firemanjim
| Posted on Wednesday, March 23, 2005 - 12:30 am: |
|
Ah,thanks for the tip.I'll peer down there and see what I find. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bluzm2
| Posted on Wednesday, March 23, 2005 - 01:07 am: |
|
Jim, I'll try smacking it again. I was able to pick up 3 bolts at the dealer today! I about fell out of my chair when I called and they said they had them in stock. I picked up more allen wrnches today. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Firemanjim
| Posted on Wednesday, March 23, 2005 - 09:21 pm: |
|
Brad,go get some quality allen sockets--Craftsman etc,to do the job.Allen wrenches all seem to be made of butter. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bluzm2
| Posted on Wednesday, March 23, 2005 - 11:42 pm: |
|
Jim, I broke 4 Craftsman sockets! I was able to get the lower bolt out but had to resort to drilling the upper 2. What a pain! If you slip with the drill even a little bit, the stainless bolt work hardens like you wouldn't believe. After the top bolt heads were drilled off the side plate came off no problem. The left over bolts were still stuck a bit. They had rusted inside the frame bosses. There was no way they were coming out with a wrench. Word to the wise S2 owner. Remove these bolts once in a while and coat them well! I think even a decent coat of Locktite Blue would have prevented this. Tomorrow I polish the side plate and mount the new isolator. The front should be a snap.. Man, it sure is easy on these S2's! (well, sort of!) Brad |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Mikej
| Posted on Thursday, March 24, 2005 - 08:12 am: |
|
(Shoot, another thing on the to-do list, thanks, I think. Note to self: buy hex wrenches - many of them.) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Henrik
| Posted on Thursday, March 24, 2005 - 08:35 am: |
|
WRT the stuck side plate bolts; When I finally got them out and went to re-install, I lubed the coned underside of the bolt head as well as the countersink in the side plate using never-seize. I'm hoping the lessened friction there will make disassembly easier down the road. Henrik |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Road_thing
| Posted on Thursday, March 24, 2005 - 09:25 am: |
|
Henrik, that should work. Just don't let it idle too long or it'll disassemble itself before your very eyes! rt |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bluzm2
| Posted on Thursday, March 24, 2005 - 10:11 am: |
|
Actually I intended to use the antisieze on the bolt heads. I figured the Locktite blue on the threads would be good enough. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Firemanjim
| Posted on Monday, March 28, 2005 - 12:08 pm: |
|
Brad,found nice long allen bolt just where you said,thanks.Amazing how much easier that comes apart after that,DUH. |
|