G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Cataract2 Posted on Monday, March 21, 2005 - 05:34 pm:        Ok, I've never done this before. So I was wondering if anyone can tell me the tools needed along with what to use. Also, maybe a brief explanation on how to do it. I have the service manual but can't find any section on how to do this.   Sleez Posted on Monday, March 21, 2005 - 05:50 pm:        check these out; http://www.gnarlyparts.com/cable_care.htm http://shop.motocrossuniversity.com/s/admin/pageserver/storyserver.asp?a=showpag e&id=1658   Cataract2 Posted on Monday, March 21, 2005 - 11:32 pm:        Thanks. Quick question, it seems the cable breaks at the part where the rubber boot is. Do we need to lube the bottom half also or is that lubed by the trans fluid? (Message edited by cataract2 on March 21, 2005)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: