G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Sleez Posted on Monday, March 07, 2005 - 06:42 pm:        I am looking for one of the spacers/standoffs that go inside the pro series CF air cleaner for S1, S3, M2 carbed bikes. It is the hex shaped spacer with internal threads and a counter sunk area on one end. The hold down screw through the CF cover goes into this spacer/standoff.   Jsunstar Posted on Monday, March 07, 2005 - 09:35 pm:        i made a set with rod and a couple of nuts... works the same. i dont think you can buy them jh   Kccyclone Posted on Monday, March 07, 2005 - 09:56 pm:        I used the long nuts made to put all-thread together. Used a little lock tight and never had a prob.   Loki Posted on Tuesday, March 08, 2005 - 12:40 am:        Sleez, ping me. I have a set of the deep stand-offs from my trashed rhc   Sleez Posted on Tuesday, March 08, 2005 - 12:00 pm:        thanks everyone, i was planning on making some (having some made at work) if i couldn't find one here. Loki, you have mail (Message edited by sleez on March 08, 2005)   Loki Posted on Tuesday, March 08, 2005 - 02:42 pm:        Sleez, you have mail back Just pop me an addy, yours for the asking. time to own up to some favors that were passed my way from fellow badweb types.   Sleez Posted on Tuesday, March 08, 2005 - 02:55 pm:        Loki, thank you!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: