G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Dtx Posted on Sunday, February 20, 2005 - 12:45 pm:        Hey all, I took off the stock mirrors on my XB9SX and got bar end mirrors. The only thing I had to figure out was how to neatly plug those holes where the factory mirrors screwed in. I went to Lowes and found a nice black plug the fits in nicely and looks good. Here is the part info: P/N 01972 Bag of two pieces "Variable depth Push Fastener Nissan" Made by Textron Fastening systems Less than a buck. It is in the hardware section of the store where the "Unique Fastener Drawers" are. The plug fits the throttle side hole perfectly, however you will need to sand down the tip of the plug about an 1/8th of an inch for the clutch side hole. For some reason this hole is not as deep as the throttle side hole.   Daves Posted on Sunday, February 20, 2005 - 03:20 pm:        Or, you could get the ones that come stock on Firebolts.   Ejiii Posted on Sunday, February 20, 2005 - 07:59 pm:        I used stock Honda plugs for a CRF230. Those plugs are used on any Honda product requiring a plug.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: