Author |
Message |
Jersey_thunder
| Posted on Saturday, February 12, 2005 - 10:14 pm: |
|
I need the top motormount to frame eyebolt/bolt assembly.... T |
Firemanjim
| Posted on Sunday, February 13, 2005 - 01:26 am: |
|
Tony,these are consumable wear items and you should just get a new one. |
Jersey_thunder
| Posted on Sunday, February 13, 2005 - 12:58 pm: |
|
they still sell this assembly?...i'll check. thanks, T |
Djkaplan
| Posted on Monday, February 14, 2005 - 07:58 am: |
|
I got one for an X1 last year for my M2 at the dealer (not sure if it is interchangeable with an S2). It costs about $50, but I had to order the whole deal with fasteners and spacers. M2's have the mounts for it but they never came delivered with them from the factory. |
Jersey_thunder
| Posted on Monday, February 14, 2005 - 06:28 pm: |
|
IS IT POSSIBLE MY 96' DIDN'T COME WITH IT? T |
Firemanjim
| Posted on Monday, February 14, 2005 - 10:49 pm: |
|
Tony,S-2's have 3. 1 at rear below oil tank to swingarm block,1 at front near oil filter to frame triangle,1 from top of frame under gas tank to ignition mount that goes between both heads. |
Djkaplan
| Posted on Tuesday, February 15, 2005 - 07:07 am: |
|
BTW, when I installed the extra tie-bar at the front engine mount to frame location, I didn't notice any change in handling. It may be totally unnecessary. I just wanted to fill the open holes with something. |
Jersey_thunder
| Posted on Tuesday, February 15, 2005 - 06:05 pm: |
|
,1 from top of frame under gas tank to ignition mount that goes between both heads. this is the one thats missing... |
Firemanjim
| Posted on Tuesday, February 15, 2005 - 08:49 pm: |
|
So,does the bike vibrate a bit?What did the dealer say?I know I have one with spacer cuz I just had about 6-7 laying on the workbench putting my bike back together. |
|