Author |
Message |
Buelltroll
| Posted on Friday, January 28, 2005 - 09:30 pm: |
|
What type of steel are brake rotors made from? I have access to a machine shop and would rather laser cut my own sawblade rotor than pay 150+ for one. (Message edited by buelltroll on January 28, 2005) |
Blake
| Posted on Friday, January 28, 2005 - 11:05 pm: |
|
How will you keep it perfectly flat? Answer... you most likely won't. Maybe at first it will be flat when you pull it off the grinder, but as soon as you put some heat to it and the residual stresses start to relieve... warp city. To ensure a good quality non-warping rotor is not a trivial matter, which is why they are not cheap. |
Buelltroll
| Posted on Saturday, January 29, 2005 - 12:12 am: |
|
A perfectly flat slab of the right kind of steel? Then have the laser guy cut it out. |
Newxb9er
| Posted on Saturday, January 29, 2005 - 12:18 am: |
|
They are probably heat tempered. Only a guess. |
Buelltroll
| Posted on Saturday, January 29, 2005 - 09:03 am: |
|
Well ya I figure its gotta be some super hard steel thats why I'm wondering WHAT KIND of steel to use. |
Maxima4xu2
| Posted on Saturday, January 29, 2005 - 11:50 am: |
|
i think buell went back to stainless for the rotors dont take my word for it was thinking of making a couple of knive outta mine when it warps |
Blake
| Posted on Saturday, January 29, 2005 - 10:17 pm: |
|
Alex, What I'm trying to communicate is that if/when your perfectly flat laser cut home-made rotor heats significantly during use, as brake rotors are want to do, it will very likely warp. However, if it is the rear brake rotor and not the front, you may be okay. The smaller diameter makes the issue of warpage less severe. I cannot say what the alloy of stainless steel used is. |
Buelltroll
| Posted on Saturday, January 29, 2005 - 10:31 pm: |
|
It will be the rear rotor. I was thinking about maybe Carbon steel or maybe Tool steel. Something REALLY hard but not brittle. I do have occasional access to Armor Plate I wonder if that would work. |
Tucsonxb9s
| Posted on Sunday, January 30, 2005 - 11:10 am: |
|
420...is that you? |
Ingemar
| Posted on Sunday, January 30, 2005 - 04:03 pm: |
|
Compare the profiles. 420's profile
|
M1combat
| Posted on Sunday, January 30, 2005 - 04:17 pm: |
|
... good shot Brian . Nailed it. |
2k4xb12
| Posted on Monday, January 31, 2005 - 04:08 pm: |
|
I caught that yesterday, but thought I was just being paranoid... Glad it's not just the voices in my head... |