| Author |
Message |
    
Fly
| | Posted on Thursday, January 06, 2005 - 01:18 pm: | 
|
Yes, the BWB vultures have descended. |
Sleez
| | Posted on Thursday, January 06, 2005 - 01:36 pm: |
|
ironmind: i'll take the swingarm and mtg block if mikej doesn't! |
Mikej
| | Posted on Thursday, January 06, 2005 - 01:40 pm: |
|
No problem here, go for it and put it to use.
My project is long term.
 |
Ironmind
| | Posted on Thursday, January 06, 2005 - 02:54 pm: |
|
I just removed that bastard swingarm this morning (tight bolts)and boxed it for for you if you want. twenty five pound package. I can check shipping. PM me. Paypal has been working best so far, but I am flexible if PP is a problem. |
Ironmind
| | Posted on Thursday, January 06, 2005 - 04:29 pm: |
|
Does anyone know where the speedo sensor is? Trying to find it for Blasterd. |
Mikej
| | Posted on Thursday, January 06, 2005 - 04:34 pm: |
|
It plugs into the engine case to the rear and right side of the starter right above the tranny area. It is held in with one hex-socket screw and is sometimes a bit stubborn to get out due to the rubber o-ring on it. DO NOT bend the wires much while attempting to get it out. The wire(s) running from it should meander towards the left side of the bike and probably under the battery tray and up to a connector behind the tailsection bodywork right about where your left thigh would be when riding the bike. |
Ironmind
| | Posted on Thursday, January 06, 2005 - 05:12 pm: |
|
Got it! it is a bitch to pull. |
Mikej
| | Posted on Thursday, January 06, 2005 - 05:19 pm: |
|
Yep, I've had to do it several times on my M2. Rotate the plastic housing back and forth 30° or so as you maintain outward pressure with a very slight rocking motion. Pliers help if you don't care about the cosmetics. Getting the connector apart can be a bit of a bear as well. |
57sporty
| | Posted on Thursday, January 06, 2005 - 07:41 pm: |
|
Friend,
I will take the belt! Ping me at stevequeen@bellsouth.net Send me your address or paypal account info.
God Bless, Steve Queen, Senior Pastor |
Ironmind
| | Posted on Thursday, January 06, 2005 - 10:50 pm: |
|
Sorry 57, the Belt just went out the door. |
Ironmind
| | Posted on Thursday, January 06, 2005 - 10:55 pm: |
|
Heres whats left
wheels and tires
frame w/ pegs and brake reseviour ??
handlebars
right controls
misc elec (coil , relays....)
tail fairing
muffler
header
headlight assy w/o brackets
oil tank
gas cap
(Message edited by ironmind on January 07, 2005)
(Message edited by ironmind on January 07, 2005) |
Walker
| | Posted on Saturday, January 08, 2005 - 12:33 am: |
|
Iron,
I need a tail section and the break reservoir if you have them. |
Ironmind
| | Posted on Saturday, January 08, 2005 - 11:22 am: |
|
PM me. the tail section has a minor issue (a crack under the seat) I'll send you pics and tell you about it. |
Walker
| | Posted on Saturday, January 08, 2005 - 05:01 pm: |
|
Iron,
Thanks for the reply. My E-mail is shawntheman01@cox.net |
Koz5150
| | Posted on Sunday, January 09, 2005 - 11:05 pm: |
|
How much for the gas cap and ring around it? Email me koszewa@hotmail.com |
Ironmind
| | Posted on Wednesday, March 09, 2005 - 08:35 pm: |
|
I've still got:
stock wheels and rubber (great cond),
stock air box/filter
All lighting
muffler/header
bars
frame (not sure if I can part w/ title yet-motor is in chopper project right now)
rear rotor
I'll take fair offers on all parts-you pay shipping. Thanks |
Rammons
| | Posted on Thursday, March 10, 2005 - 07:49 am: |
|
Can you send me a picture of the headlamp assembly? If it's in good shape I'll take it. Send the picture to rammons@earthlink.net
Thanks,
Bob |
Mikej
| | Posted on Thursday, March 10, 2005 - 10:02 am: |
|
How much do you want for the handlebars and the wheels. Thanks. |
