G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Rocketsprink Posted on Tuesday, January 04, 2005 - 10:10 pm:        ANYONE have a clear set of Crossroad installation pictures for the rerouting of wires and cables. The instruction sheet is ok, but the pictures on it look like blacked out squares. E-mailed Crossroads direct, but haven't got any response. Anyone ever do the install without dropping the forks in the triple clamps ? I have no problem with doing that, but just wondering. But clear pics would make it a little easier to understand. Thanks.   Al_lighton Posted on Wednesday, January 05, 2005 - 09:43 am:        Rocco, I've got some at the shop, I'll send them to you when I get there. Al   Keith Posted on Wednesday, January 05, 2005 - 01:57 pm:        I'll send you a set as well   Dscak Posted on Wednesday, January 05, 2005 - 03:12 pm:        Keith and Al, Installed them on my 12S. Clutch cable is pretty tight. Did either of you try the R cable and, if so, what was result? Thanks, Dan   Tsmith4378 Posted on Wednesday, January 05, 2005 - 06:03 pm:        and I have pics as well if needed   Rocketsprink Posted on Wednesday, January 05, 2005 - 06:49 pm:        Thanks Al. The more pics, the better.   Al_lighton Posted on Wednesday, January 05, 2005 - 08:32 pm:        I did not try an R cable. The routing is a bit tight for the cable, but it didn't seem overly so. Here's a few pictures of it routed on the shop XB9S. This was with the 7 degree down angle bars, the flat bars didn't really change anything as far as routing goes, though.   Black_sunshine Posted on Wednesday, January 05, 2005 - 08:48 pm:        Al....could you get a pic of that air box. That first pic is a teaser for us CF fans. I like that.   Dscak Posted on Wednesday, January 05, 2005 - 09:43 pm:        Thanks Al, that looks like the way I routed the cable on mine. By the way, anything on the new fly screen. Dan   Keith Posted on Wednesday, January 05, 2005 - 10:14 pm:        Rocco, No matter how I have routed the cable, it always seems to be in a bit of a bind. Keeping the cable lubed definitely helps. Matt from Trojan told me he used a cable from a "R" model and did not route it through the top triple clamp. He thought it worked better. Keith   Buells Rule! (Dyna in disguise) Posted on Wednesday, January 05, 2005 - 10:26 pm:        I believe this is the same airbox. Took this pic last year at the ATC BBQ.   Black_sunshine Posted on Thursday, January 06, 2005 - 06:36 am:        Thanks, Dyna. That's very sharp!   Tsmith4378 Posted on Thursday, January 06, 2005 - 06:54 am:        I had NO problems using the existing cables from my "S" you just have to route them correctly. Its a little tight but all seemed to work out. I will get my pics posted to my website with the tail swap. http://www.tsmithbuellxb9slr.com/

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: