G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Lpowel02 Posted on Friday, September 03, 2004 - 07:03 pm:        well, my speedo sensor died for the 4 kajillionth time today (I've been counting)... has anyone ever salvaged a speedo sensor? cleaned it, adjusted it, or something else? or am I stuck going back to my dealer? thanks in advance...I'm off to find the thing in my service manual Luke   Reepicheep Posted on Saturday, September 04, 2004 - 09:23 am:        You can clean them. They are magnetic, and too much metal accumulating will make them stop working... but 9 out of 10 times, they are internally blown. Somebody found a part that you can use, but it involved a lot of drilling and fabrication, and the parts are hard to get (and need to be bought in bulk). The newest part addresses the problem. The old parts can be protected with a 5 volt regulator and an inductor (under $15 worth of parts), if it has not blown yet. We have tons of info about this in the knowledge vault.   Lpowel02 Posted on Saturday, September 04, 2004 - 09:24 am:        thanks reep...I'll do some looking in the vault

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: