| Author | Message | ||
     Evtnate |
Still lokingStill looking for x1 rear rim. What is the year and model rang for a 99x1? Thanks | ||
| Outrider |
Handlebars... 7/8" OD, 6" rise, 32" width, 8-1/2" pullback, 5" centers. Can vary slightly from these dimensions. Want to try them on my X1. If you know of anyplace I can get them, please post or email me. | ||
| Firemanjim |
Jason,seems all S-2's I have seen/owned suffer from fiberglass fatigue,probably vibration induced.Some comes from an inexact fit from slight distortions in molds,perhaps.I get cracks around mirror mounts,in seat pan area and in curves of tank cover where your legs sit.Probably other places I can't remember without looking at the bike.At least I never had any of the dread "bubbles" in my paintwork. | ||
| Jbennett |
Looking for 97/98 Lighting solo seat and tail section for my 97 Cyclone. Anyone have one and or know if it will work on my Cyclone? | ||
| Koz5150 |
Looking for a Race ECM for a 2002 M2. Will pay cash if reasonable, otherwise have good exhaust header to trade if interested. Please email me... Thanks | ||
| Giraffeman |
Looking for X1 carbon tank lid must be in good condition. | ||
| Jerseyguy |
Wanted - Stock header for 03 xb9S. Please email me. | ||
| Tod662 |
WANTED... NO NEEDED speedo cable for 96 S1 tod662@hotmail.com | ||
| Josh_ |
Sportster speedo cable will work, check your local dealer. | ||
| Lowelltroll |
Yo x_man, there's a new Mikuni on ebay, under $300 "buy it now". Just listed the last day or two. | ||
| Schu |
I NEED A 2.5" EXHAUST SYSTEM FOR MY 98 S3. | ||
| Jbennett |
Still looking for a 97/98 S1 single seat and tail piece. | ||
| Chris_s1 |
Wanted: Stock Air Box, '96-'98 S1, $30? I'm looking for a stock air box as fitted to the '96 through '98 S1 Lightning. This is the squarish air box and it is NOT the same as used on this vintage S3 or M2. The outer cover is secured with a vertical screw through the top rear and a horizontal nut & bolt through a tab at the bottom rear. I'd like to find a box complete with mounting plate and all the innards, but would be happy with the outer cover at a minimum. There must be thousands of these rotting on garage shelves. I can't remember any Buell of this vintage run with the stock air box, and most had the front mounting bracket hacked off the engine mount so the air box could never be used again. Please help a fellow Buell rider. -Chris | ||
| Chris_s1 |
Wanted: Rear Header Guard, '96-early '97 S1 plus others?, $25? I'm also looking for the as-shipped rear header heat guard for my bike. In contrast to the part that supersedes the part I'm looking for, the desired heat shield has a smaller diameter and is painted flat black, not textured. I'm trying to return my bike, a '97 S1, to its as-delivered condition and appreciate any help. Thanks, -Chris | ||
| Steve_mackay |
Chis_s1 I've got an inner to the box in question. Actually, I have about a dozen or so air box inners, since I made the molds for that project  No very helpful, though... | ||
| Josh_ |
Wanted: Heat shield for S1/S3 96-98. The clamp-on one. | ||
| S1lightning |
Chris-s1 Just sold my s1 to a guy here in Kansas City. He might part with the orignal airbox and filter and guts, I put a forcewinder on it, and I don't think he wants it anymore. I owe him a phone call tonight so let me know if you are intrested?? | ||
| Firekiller |
NEEDED! Tank vent for a 1999 X1!! My local dealer is giving me the run around on trying to order one. Can someone please help. Mine just sheared off at the filler opening, had to fish the damn thing out of the tank. I am in Albuquerque, NM and would be willing to pay shipping if necessary. Thanks Sam | ||
| Loki |
Firekiller, zing me a snail mail addy, I have an extra one sitting here. Chris-S1 Zing me some info, I have what you are looking for sitting in the closet. Loki | ||
| Lee |
Josh or Chris, Email me at rpresgrave@pwcgov.org if either of you still need the rear header heat shield. Lee |
