| Author | Message | ||
     Gusm2 |
As above required for next project thanks in advance (Message edited by gusm2 on September 22, 2020) | ||
| Hawgford |
Any sportster intake from S&S or stock will work and other then takin out some material on the " corners" per alot of different vids out there it will be fine..I don't know if theres a 2 bolt type intake out there for 1200 EVOs,like shovel and ironhead but then you could do the flange mod on the keihin CV, and do away with a seal that loves to cook and leak and have much more choices of air cleaners and a cleaner look. Plus runnin s/s,mikuni and more is easy bolt up. If there is a difference in a sporty vs Buell intake,I'd like to know the details. | ||
| Screamer |
Gus, are you looking for a carburetor manifold or fuel injected manifold? If carbureted, what carb are you intending to use? Thanks - R | ||
| Gusm2 |
Carb manifold, I'm using a mikuni, I want to experiment with NOS and would like a spare to keep standard | ||
| Screamer |
I’ll check - I might have a spare. | ||
| Screamer |
I have a new or almost new carb intake manifold. Do you need the manifold seals and carb seal? R | ||
| Gusm2 |
I don't, I have new ones here, the only thing is I'm in the UK so depends on how much you need for it and how much the postage charges would work out. | ||
| Screamer |
Gus, could you send a PM with your shipping address? I could get an estimate on the shipping and total. | ||
| Gusm2 |
Now sorted, thanks for all replies |
