Author |
Message |
Cvc
| Posted on Sunday, August 16, 2020 - 06:55 pm: |
|
Okay we all are aware of the over torqued bearing spacer issue grenading wheel bearings but nowhere can I find the correct dimensions to use my micrometer to check them. Does any one have this info or new unmolested spacers they are willing to measure and post here? tuber: front length I.D. O.D. rear length I.D. O.D. XB: front length I.D. O.D. XB: (2brg) rear length I.D. O.D. XB: (3brg) rear length I.D. O.D. Blast: front length I.D. O.D. rear length I.D. O.D. |
Tpehak
| Posted on Monday, August 17, 2020 - 02:19 am: |
|
2009 Buell XB 12 Scg 2 bearing rear wheel spacer: Length: 202.67 mm Outside Diameter: 36.79 mm Inside Diameter: 31.34 mm |
Cvc
| Posted on Monday, August 17, 2020 - 12:16 pm: |
|
One down if we fill them all then I'll ask to sticky this! Thanks Tpehak !!! |
Cvc
| Posted on Sunday, August 23, 2020 - 09:41 pm: |
|
Blast rear: length:121.90mm/4.80in Outside Diameter:25.5mm/1.00in Inside Diameter:20.33mm/ 0.80in (Message edited by cvc on August 23, 2020) |
Jramsey
| Posted on Monday, August 24, 2020 - 02:14 pm: |
|
2009 XB front Length 4.250 inches 108 mm long ID.1.032 inches 26.21 mm. OD.1.250 inches 31.75 mm. |
Cvc
| Posted on Tuesday, August 25, 2020 - 01:08 pm: |
|
Getting there! thanks I Just went to my local machine shop and Rich is making a pair of Blast rears today. I have a customer at my shop who is a Timken bearing distributor. Any interest in bearing kits including a new spacer and quality bearings. |
Cvc
| Posted on Friday, May 28, 2021 - 04:55 pm: |
|
Blast rear: length 68.2mm/2.677in ID 17.98mm/.708in OD 22.18mm/.875in |