G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Cupcake_mike Posted on Sunday, July 26, 2020 - 10:04 pm:        so, I'm apparently a gorilla and while tightening up the nut that holds the fuel line to the fuel pump fitting, i successfully snapped said fitting. 06 uly if it matters. It looks to be pressed in, but because of the angle/backside of the plate i can't see how anyone would ever press it out. Anybody ever done it? Have insight? I have a new (old) plate coming from another bueller, since you can't just buy the fitting to my knowledge, but if i can just get the old fitting out and a new (old) one installed that would be nice. Thanks (Message edited by cupcake_mike on July 26, 2020)   Shoggin Posted on Monday, July 27, 2020 - 12:40 am:        I don't know if theres a 'fix' but I'd drill out the plate and put a regular AN bulkhead fitting on it.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: