| Author | Message | ||
     General_ulysses |
I have an NOS Airbox assy I bought some years ago for my '97 S1. I want to list this unit on ebay or sell it here, but I don't know what it fits (i'm not even sure it fits my old 97 S1. The P/N is 29361-96Y. Anyone know the fitment for this P/N?   | ||
| Kc_zombie |
Off hand, I think it is good for all Tube Frame Models up to 1998. Anyone else concur? | ||
| 89rs1200 |
That is for the S1. Will not work on an S3 unless it has the S1 carburetor mount. It is also slightly smaller than the S3 box. I use this S1 airbox on my S3 with the race exhaust. The stock S3 airbox was about 1/8" from the exhaust pipe. the S1 airbox is about 1/2" above the race exhaust pipe. | ||
| General_ulysses |
Thanks. I notice at the website below it seems to indicate it fits 1996 S1. But I would think it would fit all S1s. Is that right? https://serviceinfo.harley-davidson.com/sip/conten t/document/view?id=13988¶meters=highlight%3D29 361-96y | ||
| Screamer |
I dug through some S1 catalogs (1996, 1996-97, 1998) and per the catalogs (which are sometimes not 100% accuarate) 29361-96Y was a 1996 only part number. The parts were not offered in a “cover assembly” for 1997 or 1998, but the base backplate part number, and the cover part number (along with many internal components) - both changed for 1997 and again in 1998. The front motor/isolator mount changed from requiring a metal bracket between the mount and the airbox (1996) to an extended right arm which attached to directly to the airbox (1997-98). The carb support changed in 1997 and 1998 but I believe that it was material thickness, coating changes, and from a “hook” to a hole for the rear breather bolt. The hole pattern for the carb and the breather holes should have stayed the same. From that information,,,, although the -96Y airbox assembly might bolt up (at least to the carb face and heads) on most carb models — the front airbox-to-iso mount might not work, and the internal components of the -96Y airbox will not interchange with other model years. Again, this based on catalog data. | ||
| 89rs1200 |
Nice Screamer! I might add: * My S1 airbox, which is mounted on an S3, cover and back plate are made of fiberglass. I believe these are 1996 parts because, all model body parts before the 1997 model year were made of fiberglass. * The front airbox-to-iso mount lines up just fine to the 1997 S3 front motor mount. * Looked again, I was mis-remembering the spacing of the airbox to the race exhaust. Stock S3 airbox cover was touching the front race exhaust pipe. The S1 airbox cover is 1/4" above the front exhaust pipe not 1/2" above as previously stated. * The S1 airbox is slightly smaller all around than the S3 airbox. |
