Author |
Message |
Snojet
| Posted on Sunday, October 06, 2019 - 04:01 pm: |
|
My 06 Uly with just over 57k on it. Needing an exhaust header. Probably with gaskets, retaining rings, and O2 sensor. (The replacement header, if used, probably will come with the gaskets and retaining rings on it.) The O2 sensor boss in header completely broke off. Lots of noise and felt the heat on my right inner thigh. I was doing my normal 80mph to work when this occurred. In parts catalog... pages 78-79 item 11 - S0101.1AAA Header, 1ea item 2 - 65325-83A Retaining rings, 2ea item 1 - 65234-83A Gasket, 2ea page 94-95 item 25 - S0130.02A8, O2 sensor, 1ea I looked through the parts for sale section but didn't see what I needed. Help please. I really don't want to go to HD for these things... Thx, Steve(snojet) ph 909-994-9583
|
4speeder
| Posted on Sunday, October 06, 2019 - 05:42 pm: |
|
Might be quite a bit less costly to take the O2 sensor out of the bung and have the piece of broken pipe Tig welded back on the main tube. Just an option you might want to check on at your local welding shop if you haven't already checked on prices. |
Cvc
| Posted on Monday, October 07, 2019 - 02:07 am: |
|
If you were closer I would weld it for you if you don’t find one send it to me and I’ll fix and send it back. Calls are best 3606010597 |
Damnut
| Posted on Tuesday, October 08, 2019 - 09:48 am: |
|
I have a mint header from an 06 Uly if interested. |
Snojet
| Posted on Wednesday, October 09, 2019 - 07:06 pm: |
|
Another missed opportunity, story of my life "Danmut"... I checked back here yesterday morning and I did not have your response then. Thank you anyways! So, after some thought and an opinion of a former welder I decided to replace the header with a new one and the same with the O2 sensor. I found one at St Paul HD. Looking forward to riding again. |
|