G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Motorfish Posted on Wednesday, June 19, 2019 - 08:42 pm:        Hey Folks, so I replaced my stock O2 sensor at around 23,350mi with a Bosch 12014. I have around 27,650mi on it now, and I’m getting the CEL on and off at highway speeds. It’s throwing a code 13, O2 sensor. Of course, after I installed the Bosch, I read some bad things here about it. So is the stock sensor worth the extra $? I’ve read here about the NGK and GM sensors, but wondering how long they last. Any input is greatly appreciated, thanks!   Steveford Posted on Thursday, June 20, 2019 - 07:09 pm:        I'd have to look at my service log for mileage figures but NGK seems to be around 30-40,000 miles if I remember correctly. I'll use the NGK again if that helps.   Natexlh1000 Posted on Thursday, June 20, 2019 - 09:59 pm:        Before you pull the trigger, make sure the insulation hasn't rubbed through on that wire.   Motorfish Posted on Friday, June 21, 2019 - 07:13 am:        Thanks for the responses. I have to look into it, but I think I was careful when I replaced the last one, and made sure nothing was abrading the wires. Things could of changed though, I will check. 30-40k sounds good to me, I’ll go with the NGK. Thanks guys.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: