G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Mike_lee Posted on Friday, May 24, 2019 - 08:03 pm:        does anyone have the install instructions for the updated front isolator? Cannot seem to find the set that shows in detail the orientation and torque values. I recall something about it being installed differently if the stem has the cutout? Also, is it ok to use the 7/16 bolt even though the hole in the mount is 1/2? Where could such a spacer be found if needed? Many thanks   Upthemaiden Posted on Tuesday, May 28, 2019 - 07:54 am:        This is what I used: https://www.ebay.com/itm/1-2-to-7-16-REDUCER-INSERT-SPACER-HEIMS-HEIM-JOINTS/370935106918?hash=item565d748d66:g:QR0AAOSwGWNUWT9b:sc:USPSFirstClass!15146!US!-1   Mike_lee Posted on Tuesday, May 28, 2019 - 08:08 am:        thank you Josh   Upthemaiden Posted on Tuesday, May 28, 2019 - 10:30 am:        I've also seen people drill out the isolator to fit the original 1/2" bolt, but that seems excessive with such a cheap and easy solution.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: