| Author | Message | ||
     Cupcake_mike |
I am setting up my new shop and decided to pair down some of my extras. All this stuff is in good shape. Pictures below, if you'd like more detailed ones let me know. All prices do not include shipping. Open to package deals or offers if you think my prices are too high. http://smg.photobucket.com/user/mikeftbl52/library/tuber%20and%20xb%20parts 02 Cyclone front wheel, no rotor,bearings have about 2k on them, good tire shinko (2015 year code) can be removed to save on shipping $100 02 Cyclone rear wheel, rotor included, bearings have about 2k on them, good tire michelin (2015 year code) can be removed to save on shipping $125 02 Cyclone frame, great shape with title, key for neck lock included $450 02 Cyclone swingarm, all tabs intact, with axle and spacer, bearings have about 2k on them $150 02 Cyclone front end with trees, handlebar clamp and axle, seals don’t leak $200 99 Cyclone seat, stock no tears, good shape with seat holddown screw $50 06 Ulysses seat, stock height, slight discoloration from the triple tail might clean off, no tears $50 Tuber clutch perch with aftermarket adjustable lever (probably chinese) good finish $40 Tuber horn with bracket $15 Tuber throttle side handswitch with tube $35 Tuber clutch side handswitch $25 Tuber master with aftermarket adjustable lever (probably chinese), caliper (w/ good pads) and SS braided line, good life, fluid is about a year old, system is sealed $100 Tuber rear caliper with bracket $40 02 Cyclone dash with speedo and tach, around 30k on the clock, all lights work, wiring intact, key included $100 02 cyclone Ecm $75 Tuber coil $50 02 Cyclone full harness, completely in tact $150 02 Cyclone headlight with bracket $75 Stock cyclone bars $10 Stock Ulysses bars $10 Forcewinder intake (non-efi) with filter, good shape with mounting hardware $50 Tuber shock (short) with bracket and hardware, handles good, not blown out $100 Tuber Y exhaust bracket with regulator mount and hardware $50 tuber sprocket guard stock $15 tuber lower belt guard stock $10 tuber heat shield stock $10 Cyclone hugger $40 Cyclone rear trunk/tag mount with taillight $50 Cyclone flyscreen, not a horrible paint job but not perfect $30 Cyclone front fender, same paint with bracket $50 Large manta tank, rough finish, was painted and bubbled, removed the paint but the surface could use more cleaning, with some elbow grease might be able to bring the original yellow paint back, mount, petcock and cap (with key) included $75 2000 cyclone rear section in snap red, no cracks or chips, good shape $50 Ulysses air dam in good shape, no cracks, no hardware $30 Ulysses flyscreen, good shape, no discoloration $35 XB tank cover, good shape, no discoloration $60 Pair of plastic fairing mount mirrors, aftermarket good shape $30 Pair of billet fairing mount mirrors, aftermarket good shape $40 Used tuber isolators, less than 3k miles, great shape with hardware $40 Tuber battery hold down strap $15 Tuber rear master cylinder, good shape, rebuilt a couple years back $30 Tuber boomerang shifter with speed holes and bronze bushing, link bar, transmission mount is broken, all hardware included $30 Rox risers, 2 inch, new good shape $40 Cyclone ignition nosecone cover $5 Carb support bracket with aftermarket breather bolts $25 Bar end mirrors, likely chinese, good shape $15 Swingarm brace $10 Naploean euro bar end mirror (only one) good shape $20 Cyclone taillight, good shape $20 Ulysses stock driver pegs, no rash good shape $30 Tuber late stock foot controls, all in good shape with all hardware $150 Tuber Vance and Hines SSR2, decent shape, paint on badge is a bit faded, no dents or dings $75 Late tuber (non-efi) header good shape with flanges $75 (Message edited by Cupcake Mike on February 21, 2019) (Message edited by Cupcake Mike on February 21, 2019) | ||
| 97bueller |
Pictures of force winder intake the vance and Hines if its 2 inch, belt guards and the hugger For sure want the intake though. (Message edited by 97bueller on February 21, 2019) | ||
| Cupcake_mike |
97bueller, see the pictures above. If you want more detailed ones, let me know. I believe the v&h is for a 2.5" header at the elbow, but it might neck down to 2" at the muffler inlet, i'll let you know. | ||
| 97bueller |
Sorry didnt see the link. I'll take the force winder, and then didnt see any picture of the muffler | ||
| Cupcake_mike |
Looks like I didnt get a pic of the muffler or header..I'll update the album tonight. | ||
| Newmans3 |
Interested in- Rox risers Tuber heat shield stock Shipping to 19606 | ||
| Williamscottrobertson |
Interested in the rear shock, VH pipe, and bar end mirrors. $175 to 30813? | ||
| 97bueller |
Let me know when you update the pics of the Vance and Hines. | ||
| Cupcake_mike |
Updated the album with pics of the muffler and header. 97bueller is up first on the muffler then William. I'll get back to those that emailed within the next day. | ||
| Cupcake_mike |
Vr bracket and y mount sold. If you want something get with me before the 27th if you want it shipped quickly. Leaving for a week of vacation after that date. | ||
| Williamscottrobertson |
Thanks mike, just let me know, I’m flexible. | ||
| Mtjm2 |
Interested in the manta tank to 17340 | ||
| Cupcake_mike |
Heard from some guys that photobucket isnt playing nice...here they are anyway:         Mtjm2 you have a PM | ||
| Luke_m |
What would the price be for the following item shipped to 60004? Late tuber (non-efi) header good shape with flanges $75 | ||
| Cupcake_mike |
Luke, you have a PM | ||
| 97bueller |
Not sure if you got my PM Mike I had sent you one this morning on the intake and muffler. | ||
| Cupcake_mike |
97, I replied, but I think maybe it didnt go through. I sent another reply directly to your e-mail, let me know if it doesnt show. | ||
| Mtjm2 |
Didn’t show up Try my email Thanks | ||
| Cupcake_mike |
Muffler and intake sold to 97bueller | ||
| Cupcake_mike |
Mtjm2 send me an email: mikeftbl52@gmail.com | ||
| Rtlll |
I'd like carb bracket and breather bolts, battery strap and tuber heat shield. $45 shipped to 60491 ? Thanks, Rick rtlll@yahoo.com | ||
| Cupcake_mike |
Rt, sent you an email | ||
| Mike_lee |
Id be interested in the seat and tail section if it fits a 99 m2.i think it does.. Can anyone confirm? To erie pa 16505 | ||
| Cupcake_mike |
Mike, the seat and tail section will fit a 99 m2... there is one person in front of you who has called dibs on the seat. Shock, bar end mirrors and manta tank are sold. | ||
| Mike_lee |
Pm sent | ||
| Cupcake_mike |
Heat shield and rox risers are sold | ||
| Cupcake_mike |
Cyclone seat, rear section, header and both sets of handlebars sold (Message edited by Cupcake Mike on February 23, 2019) (Message edited by Cupcake Mike on February 24, 2019) | ||
| Cupcake_mike |
Everyone who purchased parts, they have been shipped. If you contacted me but haven't heard back, please try again at my email, mikeftbl52@gmail.com. I'm leaving for vacation tomorrow, will be back on 3/6. I'll be available via email if you want something, but shipping won't happen until I get back in town. Here's an updated list with availability and (adjusted) prices 02 Cyclone front wheel, no rotor,bearings have about 2k on them, good tire shinko (2015 year code) can be removed to save on shipping $100 02 Cyclone rear wheel, rotor included, bearings have about 2k on them, good tire michelin (2015 year code) can be removed to save on shipping $100 02 Cyclone frame, great shape with title, key for neck lock included $400 02 Cyclone swingarm, all tabs intact, with axle and spacer, bearings have about 2k on them $125 02 Cyclone front end with trees, handlebar clamp and axle, seals don’t leak $150 06 Ulysses seat, stock height, slight discoloration from the triple tail might clean off, no tears $50 Tuber clutch perch with aftermarket adjustable lever (probably chinese) good finish $40 Tuber horn with bracket $15 Tuber throttle side handswitch with tube $35 Tuber clutch side handswitch $25 Tuber master with aftermarket adjustable lever (probably chinese), caliper (w/ good pads) and SS braided line, good life, fluid is about a year old, system is sealed $100 Tuber rear caliper with bracket and good pads $40 02 cyclone Ecm $60 Tuber coil $40 02 Cyclone full harness, completely in tact $100 02 Cyclone headlight with bracket $65 tuber engine pully cover stock $15 tuber lower belt guard stock $10 Cyclone hugger $40 Cyclone rear trunk/tag mount with taillight $40 Cyclone flyscreen, not a horrible paint job but not perfect $25 Cyclone front fender, same paint with bracket $40 Ulysses air dam in good shape, no cracks, no hardware $30 Ulysses flyscreen, good shape, no discoloration $35 XB tank cover, good shape, no discoloration $50 Pair of plastic fairing mount mirrors, aftermarket good shape $25 Pair of billet fairing mount mirrors, aftermarket good shape $35 Used tuber isolators, less than 3k miles, great shape with hardware $40 Tuber battery hold down strap $15 Tuber rear master cylinder, good shape, rebuilt a couple years back $30 Tuber boomerang shifter with speed holes and bronze bushing, link bar, transmission mount is broken, all hardware included $30 Cyclone ignition nosecone cover $5 Carb support bracket with aftermarket breather bolts $25 Swingarm to engine brace stock $10 Naploean euro bar end mirror (only one) good shape $20 Cyclone taillight, good shape $20 Ulysses stock driver pegs, no rash good shape $25 Tuber late stock (flat) foot controls, all in good shape with all hardware $125 (Message edited by Cupcake Mike on February 25, 2019) | ||
| Xr75044 |
ulyesses parts handlebars seat flyscreen tank cover orange do have yet | ||
| Cupcake_mike |
Seat, flyscreen and tank cover available, bars are sold. Email me mikeftbl52@gmail.com if you want them. |
