G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Fullpower Posted on Wednesday, May 19, 2004 - 03:37 pm:        Is the Buell XB OBD-2 compliant? can a cable be constructed to allow normal regular scan tools to be used for resetting the ECM on our bikes? any one figure out the data stream on the diagnostic plug yet?   M1combat Posted on Wednesday, May 19, 2004 - 04:27 pm:        I don't think anyone is working on the data stream. I was making an effort there for a while but couldn't find anyone who would allow me to use their DT for my recording process.   Bigbird Posted on Wednesday, May 19, 2004 - 09:26 pm:        Is the Buell XB OBD-2 compliant? No. OBDII is an automotive specification. Motorcycles are not required to comply to it, and as far as I know none do.   Opto Posted on Thursday, May 20, 2004 - 06:13 am:        M1, couldn't you just jumper the 2 wires, switch on the ignition and see if a datastream comes out the send wire and record that? Well, someone's gotta start somewhere...now don't come back with excuses

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: