| Author | Message | ||
     Bhillberg |
09 CR... I know it is easy but I forget how the heck to do it. Can someone let me know please | ||
| Bhillberg |
nevermind, found it delete this post please | ||
| Froggy |
Rather than being selfish, why not post what you learned? Someone 2 years from now will find this thread looking for the answer. | ||
| Ratbuell |
There's a screw, dead-center, bottom of the light housing between the forks. Put tape on your front fender so your screwdriver doesn't scratch the fender. Actually...it's either a screw, or a small hex-head bolt. Forget which at the moment. Tighten the screw/bolt, headlights point higher. Loosen it, they point lower. | ||
| Ratbuell |
I think. Now I'm second-guessing myself on which way with the bolt (tight/loose) equals which way on the beam (hi/low). I forget if it moves the bulbs in the reflectors, or the reflectors around the bulbs...but when you're doing it, you can see what the result is well enough. Just point at the garage door, makes the beam easier to see  | ||
| Greenman44 |
Froggy, Or someone 7 years and 11 days 5 hrs and 42 minutes later will be searching for it. Isn't the internet amazing? |
