Author |
Message |
Crjunkie1
| Posted on Sunday, March 18, 2018 - 08:44 pm: |
|
Hey Gang, My son just sold his 2009CR and I have a GROUP of stuff left over from this bike. Most of it is either brand new, or, if previously mounted/used, would pretty much pass for new. All is well cared for. There wasn't really too much riding going on with this bike for various reasons. Anyway, as I'm sure most of you already know, much of it will work with both the R and CR models. There's everything from a size large Buell "Turbulent" leather jacket,(in uber-nice, clean shape!) size large Buell button down racing shirt,(also in uber nice, clean shape!) red Buell 'Pegasus' baseball cap, owner and factory maintenance manuals, complete new charging system including the EBR edm'd rotor, Rick's stator, and reg/rectifier. There's a crank locking tool and complete kit with nut, sealants, drill bits, (to drill your own rotor if you like) 6mm aligning bolts for cover removal/install, etc., basically everything to change out the charging rotor except for the cover gasket. There's a complete, new factory clutch cover kit with seal, puck, and a Pegasus medalion. There's aluminum/Delrin 'Frankenstein bolt' frame sliders(x4), CRG 'Arrow' bar end mirror, Oberon clutch slave kit, Sidi Vortex boots in size 9-9.5,(worn only twice) Buell racing knee sliders, Corbin saddle(with maybe 6-8 rides on it), Creese' Pegasus rider heel guards, Buelltooth wireless ECM dongle for map uploads, LSL Delrin axle sliders(x4), custom milled aluminum foot brake and shift levers with knurled pegs, and a butt-load of carbon fiber parts to dress it up including; front/rear fenders, sprocket cover, exhaust heat shield, airflow guide, and a set of left and right Taylormade Racing carbon fiber with Kevlar case covers. Again, most of this stuff is either brand new or, in 'like new' condition. I tallied up what I had paid for all of it (recently) and it came out to well over $3500.00 worth of individual purchases. Ideally, I would attempt to get about .70 - .80 cents on the dollar (based upon retail price and current condition) but, I REALLY DON'T want to piece-meal this stuff out. Having to make 50 trips to the post office to try to get it moved on to good homes doesn't really appeal to me either so, this is what I'd propose instead... How about someone or, a group of someones' get together and buy the whole lot of goods from me in one swift shot for say, $1700.00 ? I'd be more than happy to ship it out (at your cost) whichever way you want me to. That way, someone is getting all of this for roughly .50 cents on the dollar and can keep it, flip it for profit, sit on it, whatever floats your boat. So, if you or, someone you know, might be SERIOUSLY interested in this great package deal, please get back to me and I'll discuss the particulars with you. All that I ask is that you please be serious about putting it together as a complete package deal and then follow through with me accordingly. Thanks in advance for your time and consideration. I look forward to hearing from you. |
Xbuell12s
| Posted on Sunday, March 18, 2018 - 09:40 pm: |
|
Where are you located? |
Crjunkie1
| Posted on Saturday, April 14, 2018 - 01:09 pm: |
|
My son just sold his 2009CR and we have a GROUP of stuff left over from this bike. Most of it is either brand new, or, if previously mounted/used at all, would pretty much pass for new. All is well cared for. There's everything from a size large, black Buell "Turbulent" leather jacket, size large Buell button down racing shirt, red Buell 'Pegasus' baseball cap, both owner and factory maintenance manuals, complete new charging system including an EBR rotor, Rick's stator, and a reg/rectifier. Along with those, a crank locking tool and complete kit with nut, sealants, drill bits, 6mm aligning bolts for cover removal/install, etc. Basically, everything to deal with the charging rotor concerns except for the cover gasket. There's a complete new factory clutch cover kit with seal, puck, and a Pegasus medallion. There's also a set of aluminum/Delrin 'Frankenstein bolt' frame sliders.(x4) one set mounts in the usual location at the upper frame to engine mounts AND, the other set mounts where the rear passenger foot peg drop brackets mount. There's a CRG 'Arrow' bar end mirror, Oberon clutch slave kit, Sidi Vortex boots in size 9-9.5,(worn only twice) Buell racing knee sliders, Corbin saddle, Creese' Pegasus rider heel guards, Buelltooth wireless dongle for ECM map uploads, LSL Delrin axle sliders(x4), custom milled aluminum foot brake and shift levers with knurled pegs, and a bunch of carbon fiber parts to dress up your bike including; front/rear fenders, sprocket cover, exhaust heat shield, airflow guide, and a set of left and right Taylormade Racing carbon fiber with Kevlar case covers. Again, most of this stuff is either brand new or, in 'like new' condition. There's well over $3500.00 worth of individual purchases here. I REALLY prefer not to have to sell all of this stuff piece by piece so, how about someone (or, possibly a group of someones') get together and buy the whole lot of goods from me in one swift shot for best offer over $1500.00. (you cover the shipping as well) I'd be more than happy to ship it out whichever way you want me to. That way, someone is getting all of this for less than .50 cents on the dollar! Not a bad deal... So, if you or, someone you know, might be SERIOUSLY interested in this package, please get back to me and I'll be happy to discuss the particulars with you. Thanks in advance for your time and consideration. |
Sunburntsnype
| Posted on Wednesday, July 11, 2018 - 11:37 pm: |
|
hey is any of this stuff still for sale? |
Crjunkie1
| Posted on Sunday, July 29, 2018 - 07:03 pm: |
|
Hey gang, I still have all of the stuff from the original post up for sale. I suppose if I need to get 'creative' and split this stuff up (within reason) I will consider that too, as long as I can get enough interest to move it all out. Ultimately, I would still prefer to move all of it out in one swift shot if possible but, will consider all offers. Feel free to make me a reasonable offer on this stuff... Thanks |
Normthenomad
| Posted on Tuesday, July 31, 2018 - 12:11 pm: |
|
If you split things up I'd like to call dibs on the Turbulent jacket. Maybe PM me with a picture? Thanks. |
A_s_r
| Posted on Tuesday, July 31, 2018 - 06:40 pm: |
|
Tracy, I sent a PM last night about interest in the parts, manuals, and accessories. If Norman is interested in the jacket, that would take care of most of the items you have for sale. I’m close enough to pick up the parts as well! |
Crjunkie1
| Posted on Thursday, August 02, 2018 - 10:16 pm: |
|
Hey Guys, I've been responding to you, Aubrey but, haven't heard anything back yet. I see your message here but, apparently you're not receiving my p.m.'s??? Norm, same thing. I just now p.m.'d you. Hopefully we can all hook up and work something out between us. Give it another try. Thanx, Tracy |
A_s_r
| Posted on Thursday, August 02, 2018 - 11:00 pm: |
|
Tracy, Got your PM that you sent today and responded! Even checked my spam folder and didn’t see any other messages. Weird. Thanks, Aubrey |
Normthenomad
| Posted on Friday, August 03, 2018 - 03:14 pm: |
|
Same as A s r, got your pm this morning and replied. Hopefully everything is working now. |
|