G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Yan Posted on Friday, July 13, 2018 - 11:05 am:        anybody knows what size they are? Some people say T47, others T45. I bought a T47 socket and it feels like an uncomfortably tight fit. It's an '08 XB12X in case if that makes a difference. Thanks!   Shoggin Posted on Friday, July 13, 2018 - 01:29 pm:        I use a T45 with no problems, but it does seem loose so I'm careful to twist them squarely. A little heat if they've been on for a long time and check your torque spec to tighten, I think its only 32-ish Lbft? IIRC   Yan Posted on Friday, July 13, 2018 - 02:18 pm:        Thanks Shoggin! I think I'll just get a T45 as well and will see which one feels better. The torque is 35-37 lb-ft   Etennuly Posted on Friday, July 13, 2018 - 03:52 pm:        Yeah, but they will have thread locker. Might have to heat them up a little. Generally I make sure I have a clean square fit using an impact wrench.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: