| Author | Message | ||
     Normally_aspirated_sucks |
At one time there was a cross reference from buell to Harley P\Ns for the tubers, I tried searching, but for some reason I'm stuck on stupid and can't find it. Can someone throw me a bone? Specifically, looking for a stator and rectifier, but would really like to have the whole list. (Message edited by Normally aspirated sucks on March 27, 2018) | ||
| Brother_in_buells |
Here is a parts list, http://www.badweatherbikers.com/buell/messages/384 2/790503.html?1492696442 Most is for xb ,but the stator also for the tubers | ||
| Williamscottrobertson |
I have a list of “old vs new” PN in pdf from new castle hd, if that’s any help. | ||
| Normally_aspirated_sucks |
Ya, that might help. I finally figured out my stator was bad and am picking the new one up tomorrow. It would be nice to have a part number instead of talking to some of the LESS than informed parts people. Not all, but my conversation went. Me: I need a stator for a Buell 02' M2. Him: We don't sell Buell's Me: Same Part as any 02' 1200 Sportster engine. Him: You said you were looking for a Buell Parts. Me: Fine, just get me a 02' sportster stator. And can I have the part number? Him: It's a Harley number, not a Buell P/N. Me: Nevermind, I'll call someone else. | ||
| Lake_bueller |
Call Lance at St. Paul H-D. He's the Buell parts guru!!! | ||
| 651lance |
We have the OEM and aftermarket stators in stock for your bike along with all the gaskets and seals. Call me at 651-738-2168 or my direct line of 651-264-3364. Im in the store from 8-5 tomorrow and Friday. | ||
| Normally_aspirated_sucks |
Thanks Lance. I ended up going to an independent shop that ordered me one up. It's been a few years since I was active on this board, trying to figure out where everything is now. | ||
| Lasbuell |
Speaking of, my 02 X1 is leaking oil from around the wires from the stator I believe. I need to jump into this before the weather breaks. Any hints or tricks to fixing this. Oh and NO i'm not going to goop a ton of silicone all over it. Please and thank you. | ||
| Firemanjim |
Take off primary and remove that plug, goop it up and re-install. | ||
| Lynrd |
Goop on the inside is better than goop on the outside. Be sure to select a high quality goop with long term goopiness. I recommend...Goop. | ||
| Williamscottrobertson |
Permatex Motoseal, they carry it at AutoBone. |
