G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Thunderlust Posted on Sunday, March 25, 2018 - 08:34 pm:        Someone on BW mentioned tha i need a special socket from Proto to change out the ETS. does anyone know what size socket or Proto part number? Thanks, thunderlust   Buelliedan Posted on Monday, March 26, 2018 - 01:12 pm:        Not a special size but you do need a slot cut in the side to get around the wires. It is just a 1/2" deep socket   Brother_in_buells Posted on Monday, March 26, 2018 - 03:26 pm:        If you have some tube wrenches like this, https://www.ebay.com/itm/Tap-Repair-Spanners-Box-H ex-Square-Tube-Tubular-Socket-Wrench-Plumbing-Tool -/200918683320 then there is no need for a special tool or cutting one up.   Thunderlust Posted on Tuesday, March 27, 2018 - 02:00 pm:        There was someone who mentioned that Proto has a socket with the slot cut in it with a part number. Maybe I'll check with Proto.   Akbuell Posted on Wednesday, March 28, 2018 - 11:14 am:        Try ironmachine.com. $19.95 for the socket. Or, get a deepwell socket of the correct size from the auto tool section at the grocery store and cut a 1/8" by 1 3/4" long groove in it. When you get in there, don't forget to blow the well out with an air chuck to get debris out before removing the old one. Hope this helps, Dave

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: