G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   H0gwash Posted on Sunday, January 07, 2018 - 08:58 pm:        I found this cleaning out the garage. This came to me from the previous owner who said it needs repacking. 2-1/2" diameter inlet. $150 + shipping.   Rtlll Posted on Monday, January 08, 2018 - 11:49 am:        Good morning, I'm interested, can you confirm which model this came off of ? Thanks, Rick   H0gwash Posted on Monday, January 08, 2018 - 12:55 pm:        I did not remove this from anything, I inherited it from the previous owner who only mentioned it has to be repacked. I think the 90 degree bend and the 2-1/2 inch inlet makes it useable for most of the late Tubers, but hopefully someone can be more difinitive.   Upthemaiden Posted on Monday, January 08, 2018 - 01:04 pm:        2.5" inlet will fit X1s, M2s with the header that goes OVER the frame, S1W white lightnings(not regular S1s), and I believe the S3 but I'm not 100% sure on that one without googling pictures of them.   Buell3some Posted on Monday, January 08, 2018 - 03:01 pm:        I've owned a couple of those V&H SS2R'S. Had one on my 2000 X1 and my 2002 S3T. I'm not interested in it just letting you know that you're correct in fitting late model 99-2002 tubers and the 98 S1W with 2.5" inlet and header that goes over the frame. If memory serves me correct the V&H part# was 16531.   H0gwash Posted on Tuesday, January 09, 2018 - 01:14 pm:        Hello Rtlll. What bike are you looking to put this on? The RR1200 on your profile page? FWIW it looks like it is about $25 to ship to zip code 60491. If you're still interested you can send your delivery address and paypal $175 to GerardWing@Comcast.Net   Ratbuell Posted on Tuesday, January 09, 2018 - 05:11 pm:        This will fit any 2.5" stock header with a side-facing collector. The only other 2.5" collector-header was the Buell race part, which has a rear-facing collector. Header bend shape is immaterial here, the mufflers mount the same way. Collector/outlet size and position is the determining factor. And yes, starting in '98, the S3 also had a factory 2.5" header - any Thunderstorm bike has this collector size. S2: rear-facing 2" outlet. Unique, only S2. Pre-thunderstorm: 2" side-facing outlet (96-98, except S1W and 98 S3, which were the first Thunderstorm motors) Thunderstorm: 2.5" side-facing outlet Race: 2.5" rear facing outlet. Requires aftermarket, or Buell Race, muffler.   H0gwash Posted on Wednesday, January 10, 2018 - 03:53 pm:        Hello Robin- If you're still interested please send your delivery address to my email at GerardWing@Comcast.Net so I can let you know what shipping will be. Then you can paypal me at GerardWing@Comcast.Net. If Rtlll sends me his delivery address and payment first, I will sell to him since he expressed first interest.   Thunderlust Posted on Wednesday, January 10, 2018 - 05:38 pm:        This will fit any'99 and later Tuber   Cupcake_mike Posted on Wednesday, January 10, 2018 - 10:33 pm:        I can't believe it was ran long enough to need repacking, and that front mount hasn't needed to be rewelded!   Ebutch Posted on Wednesday, January 10, 2018 - 10:52 pm:        Mounted right I got 135,000 miles on mine then polish it and sold here.   H0gwash Posted on Thursday, January 11, 2018 - 03:58 pm:        muffler is sold.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: