Author |
Message |
Com4nd3r_bly
| Posted on Monday, September 04, 2017 - 07:35 pm: |
|
2006 xb12 uly 15,000 miles. so i replaced both intake seals which were a pain, bike sat in my garage for a month till my mechanic friend was able to place all 4 bolts on intake but now when i start her up it jumps to 2500 rpm then drops and sputters between 800 to 1400 then dies.} (Message edited by com4nd3r_bly on September 04, 2017) |
Gabby_duck
| Posted on Thursday, September 07, 2017 - 03:51 am: |
|
How was bike running before seal replacement? |
Gabby_duck
| Posted on Thursday, September 07, 2017 - 03:55 am: |
|
If seals have been replace properly and are not leaking, have tps reset per service manual |
Gabby_duck
| Posted on Thursday, September 07, 2017 - 04:31 am: |
|
How was the bike running before seal replacement? Assuming seals were the only problem I think your Ecm needs the AFV (adaptive fuel value) reset. |
Com4nd3r_bly
| Posted on Sunday, September 10, 2017 - 08:05 am: |
|
before the bike drove good except sometimes the bike would jump up to 3000 rpms when at a light and i would have to let go of clutch slowly to make it go back down and most people were saying it was my intake seals going bad. im in the middle of trying to install ecm spy but i guess i have to download other files or something and im lost i don't know why they just wouldn't just give you everything you need on there or maybe im doing something wrong |
|