Author |
Message |
Fenderbender
| Posted on Tuesday, September 05, 2017 - 07:01 pm: |
|
Anyone know where I can get a spacer for the muffler mount bracket? |
Mhlunsford
| Posted on Tuesday, September 05, 2017 - 07:48 pm: |
|
If the space your referring to is the one between the fork in the new exhaust mount, I picked up something similar at home depot where they have the screws: they come in various lengths and diameters. |
Fenderbender
| Posted on Tuesday, September 05, 2017 - 09:30 pm: |
|
Its the one with the header support mount. Ill see if I can find something at home depot. Wasnt sure if this piece was metal or hard rubber |
S1owner
| Posted on Wednesday, September 06, 2017 - 12:56 am: |
|
Pictures help |
Jayvee
| Posted on Wednesday, September 06, 2017 - 02:47 pm: |
|
It's metal. I had to buy a replacement spacer and bolt when that bolt fell out. I can't remember now if it specifies a locking nut but at the time all I had was nylok, and I was afraid the nylon insert might not be reliable with the heat. Later I got some all metal lock nuts, that's what I have on it now. |
Mhlunsford
| Posted on Wednesday, September 06, 2017 - 03:23 pm: |
|
What I did was use two nuts and a star lock washer along with lock tight blue. Since next to exhaust, it will vibrate and get hot. |
Fenderbender
| Posted on Wednesday, September 06, 2017 - 04:05 pm: |
|
|
S1owner
| Posted on Wednesday, September 06, 2017 - 04:28 pm: |
|
You can use pretty much anything a hand full of washers will work.
|
Fenderbender
| Posted on Wednesday, September 06, 2017 - 04:54 pm: |
|
Cool, thanks! |
|