| Author | Message | ||
     Hugie03flhr |
Ok, I realize I need to go in by the rear shock but how do I remove this comfort kit covering the shock and fan area? I was reading installation directions for the kit but I'm having a hard time understanding how it's held in. Do I have to remove the entire truck pan, ECM, battery and so on to get to this O2 or is there a way to just lift this plast cover off that's covering the top of the shock? | ||
| Nillaice |
well, if the comfort kit has to come off, then you'd have to take off the seat pan to re-install the comfort kit.  the other option to getting at the O2 sensor is to rotate the engine ... 6 or half dozen, but since you're gonna hafta rip the bike in half, might as well check stuff out while you've got it apart. is there anything else that needs fixed/replaced inspected ? ... fan, rocker box seals, throttle body, shock preload adjuster re-build? ... big bore kit?  | ||
| Hugie03flhr |
Oh man!!! You gotta be kidding me!!! I'm ready to relocate the O2 sensor! It would be easier to weld a new bung! |
