| Author | Message | ||
     Easyrider |
The heads of my XB15 project, the boring was 11.5:1 ans is now 10.8:1. There is more space for the valves for the incoming gasses. We used Baisley valves , black daimond tulipstyle, multi angle. The picture, left is the original head, right is the XB15 head .. http://www.buellforum.nl/misc.php?file=1477 And of course the 48 MM Carb.. http://www.buellforum.nl/misc.php?file=1312 This is our Dutch topioc of the project where we will post all pics and discusions... http://www.buellforum.nl/topic.php?id=51 and this one http://www.buellforum.nl/topic.php?id=51 | ||
| Easyrider |
and another look inside the XB15 project the rollerrockers http://www.buellforum.nl/misc.php?file=1488 | ||
| Easyrider |
and the old topic http://www.badweatherbikers.com/buell/messages/32777/42632.html#POST219847 | ||
| Noface |
Mebbe it's just me, but I get error's loading the page. Can't seee sheeeit! | ||
| Easyrider |
on wich page noface... | ||
| Bud |
easy, the dutch buell forum is down @ the moment grrrrr. so the links above don't work as well. i'm sure it's just for the moment, but very not so nice  gr,b | ||
| Bud |
and as we speak, it on the air again  only piece by piece | ||
| Alex |
Easyrider, what valve sizes did You use? What stem diameter size? Can You give me some flow numbers? Thanks in advance. Best regards. | ||
| Easyrider |
alex, thats top secret at the moment we will share all the information later  | ||
| Easyrider |
just for fun we need to make the adaptor... next week first startup...  http://www.buellforum.nl/misc.php?file=1507 | ||
| Easyrider |
I am wondering if there are other people in the world wich are also tuning there XB to 1425 CC, anyone.... | ||
| Glitch |
In my dreams... But I do have a "Buell account". 1200 is what I'll probably do this winter. | ||
| Shazam |
I am...... couple of more weeks to finish assembly, | ||
| Easyrider |
Shazam, assembly of what.............. | ||
| M1combat |
I will be. I may only go for 1350 though. | ||
| Shazam |
assembly of my 88" (1426cc) XB motor. though I still haven't decided which direction I am going with the fuel system, it may be a while before it actually runs.... | ||
| Easyrider |
M1combat, when do you plan to do this.... great choice..... | ||
| Easyrider |
shazam, why it may be a while before it actually runs.... problems.... I can post my carb experience if you would like.. | ||
| Wyckedflesh |
I will be but I shall be waiting until its rebuild time for the current motor first. Unless I come across a donor bottom end to play with that is, then I might do it for the swap back and forth for special events. | ||
| Easyrider |
Only a few days left to start the engine.... I am happy...  | ||
| Shazam |
what are you waiting for? | ||
| M1combat |
I have no idea when... I will bore it as far as it'll go and then get a custom crank for whatever stroke I need. | ||
| Easyrider |
shazam, we need to make a good adaptor for the 48 mm downdraft carb... this weekend I WILL START THE ENGINE....  | ||
| Shazam |
good luck! | ||
| Easyrider |
The carb.. more pictures next week http://www.buellforum.nl/misc.php?file=1607 http://www.buellforum.nl/misc.php?file=1606 | ||
| Darthane |
Did it start? Did it start? Did it start? | ||
| Easyrider |
Darthone,I wish it did... we have some small challenges to go.. maybe today. | ||
| Easyrider |
ohohohohohohohohohohohohohohohoho what a sound what a sound and what a power. tomorrow on the dyno for the fine-tuning. I will sleep very well tonight...  | ||
| Easyrider |
The First Dyno.. At this moment we have 150 NM en 110 HP.. but the engine is running very lean.. stil work on that. the power will then also increase... http://www.buellforum.nl/misc.php?file=2133 |
