| Author | Message | ||
     Gomo |
......any suggestions what I need to check first | ||
| Gearheaderiko |
Check to see if the LED on the ignition module is flashing when it's cranking over. | ||
| Gomo |
So I check the ignition module and the light blinks. I check the lean angle sensor no issue. Then I realized I am the dumb....of the day - it's been a year since someone rode the bike and I forgot that the side stand needs to be up to start. It will turnover all day with it down. Of the 6bikes in the garage, the Blast is the only one that does this. That age thing is starting to affect my brain  | ||
| Gearheaderiko |
You have a bad safety switch somewhere. I would just bypass the kickstand safety switch by joining the 2 wires going to the kickstand together. It should start with the kickstand up or down. |
