Author |
Message |
Kmbuell
| Posted on Monday, June 05, 2017 - 04:07 pm: |
|
All are from an 8500 mile 2000 M2. Parts are clean and ready to ship. Prefer PayPal Family and Friends to keep costs down. Cam Cover with hardware, silver Powder Coat, no damage. Looking for $85 shipped in the US.
Primary Cover, bare, with hardware, silver Powder Coat, slight wear from primary chain contact. Looking for $100 shipped in the US.
Engine Cases, bare with hardware, silver Powder Coat. No damage. Looking for $225 shipped in the US.
Thunderstorm Pistons and Cylinders. STD bore, silver Powder Coat. Cylinder have no scratches, gouged or discoloration. Looking for $150 shipped in the US.
"D" Cams and Lifters, lifter is packed with the correct cam. 2000 up High contact gears. Can include pinion gear if needed to install in older bikes. Looking for $125 shipped.
Pushrods, Pushrod Tubes, Bases and Anti-rotation Pins, set of 4. Clean ready to install. Looking for $40.00 shipped in the US.
Oil Tank, with all fittings and cap. Fits all M2 / M3. Looking for $35.00 shipped.
PM me at kmeath34@gmail.com with Dibs or questions. |
Normthenomad
| Posted on Thursday, June 08, 2017 - 11:35 am: |
|
Pm sent 6/7/17 no response from you, are you getting them? |
Kmbuell
| Posted on Thursday, June 08, 2017 - 03:50 pm: |
|
Norm, replied, sorry been trying to catch up after vacation. \Kevin |
Kmbuell
| Posted on Thursday, June 08, 2017 - 04:02 pm: |
|
Norm, replied, sorry been trying to catch up after vacation. \Kevin |
Kmbuell
| Posted on Monday, June 26, 2017 - 01:33 pm: |
|
Bump to the top. Cases are spoken for, waiting on funds. Make an offer, might surprise you. Thanks, Kevin |
Upthemaiden
| Posted on Monday, June 26, 2017 - 10:09 pm: |
|
Hey, saw these parts on eBay, and saw you previously had an intake manifold(was on my watch list) that says it was unsold. Any chance you still have that one to sell? |
Kmbuell
| Posted on Wednesday, June 28, 2017 - 11:08 am: |
|
Josh, PM sent. Kevin |
Upthemaiden
| Posted on Tuesday, July 04, 2017 - 11:37 pm: |
|
Hey Kevin, I responded to your email but never heard back from you. Let me know what email you use for paypal and I'll send the money for the intake manifold. I assumed it was probably the one you had listed above but I wanted to make sure. |
Kmbuell
| Posted on Wednesday, July 05, 2017 - 11:20 am: |
|
Josh, I didn't see your reply. Paypal is the same as my email address, kmeath34@gmail.com Make sure i get your ship to address, Thanks, Kevin |
Upthemaiden
| Posted on Wednesday, July 05, 2017 - 02:03 pm: |
|
Appreciate it! I'll send my address with the payment. Do you have other random parts you're gonna be getting rid of, or were you just parting this one engine? I still need to get one of the longer bolts that bolts the rear shock to an aluminum swingarm. Just a shot in the dark. |
Kmbuell
| Posted on Wednesday, July 05, 2017 - 08:45 pm: |
|
I have plenty of random parts! Do you have an idea of the length you need? I've got a couple of shocks here that most likely have the bolts on them. I also have a complete set of yellow M2 body work, probably a 6 of 10, no crash damage but stained paint from being stored in a barn. I think the tail has the very beginnings of some slight cracking. Also a complete Aluminum swing arm swing arm set up from the mount block to the axle and adjusters. Kevin |
Upthemaiden
| Posted on Thursday, July 06, 2017 - 10:06 pm: |
|
I don't know exactly how long the bolts were that came with the aluminum swingarms, but I measured my bolt and it appears to be about 1-3/4" or 45mm. I believe the newer ones are supposed to be about half an inch longer, so the proper ones should be about 2-1/4" or 55mm long. Just let me know if you happen to have one, and how much extra you'd want for that and I'll get the money sent to you as soon as I hear back. Thanks! |
Upthemaiden
| Posted on Sunday, July 09, 2017 - 11:00 am: |
|
Alright, I just sent the money for the manifold. If you find one of the bolts and want a couple extra dollars for it just let me know. |
|