Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
E30dean
| Posted on Tuesday, April 18, 2017 - 04:58 pm: |
|
Well after being away from Buells for 3 years, I have finally made a comeback. Tried a few bikes in between, 2004 Honda vfr800, 1999 xr600r supermoto, 2006 Kawasaki z750s, 2008 Aprilia shiver, 2011 Kawasaki ninja 1000. I just had to get back on a Buell, so I was able to find some one interested in trading their 1125r for my ninja 1000. Here she is, 08 1125r with 14k miles and only modification so far is a race ecm.
![](http://www.badweatherbikers.com/buell/messages/290431/805071.jpg)
![](http://www.badweatherbikers.com/buell/messages/290431/805072.jpg)
|
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Mog
| Posted on Tuesday, April 18, 2017 - 06:32 pm: |
|
A major welcome back E30dean. Looks to be a very clean machine. Best to you!!![](http://www.badweatherbikers.com/buell/clipart/clapsmile.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Nate
| Posted on Tuesday, April 18, 2017 - 06:57 pm: |
|
Welcome back! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Willmrx
| Posted on Tuesday, April 18, 2017 - 07:10 pm: |
|
Nice bike! Great choice! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Dennis_c
| Posted on Wednesday, April 19, 2017 - 06:51 pm: |
|
Time for valve service has it been done yet? Nice clean bike I have one realy like it |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Duanelr
| Posted on Thursday, April 20, 2017 - 04:55 pm: |
|
Congratulations, I have an 08 as well. (Stock exhaust with the appropriate Race ECM) In my opinion the ECM is the most important upgrade to make. Low RPM's are still a bit dodgy, but it's so much better than the OEM. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Redman1125r
| Posted on Thursday, April 20, 2017 - 11:13 pm: |
|
Excellent bike. I just sold my Jardine RT5 and put on a Barker's with the race ECM. WOW! What a difference...from idle up. It just runs perfectly from bottom to top. Even the idle is better.....Ebay...do it. BTW, I put in the decibel killer tube and turned the "spout" tip to face down, and it's quite acceptable. Loud but not annoying. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
E30dean
| Posted on Monday, April 24, 2017 - 10:30 am: |
|
Thanks for all your comments!! "Time for valve service has it been done yet? Nice clean bike I have one realy like it" The previous owner said that the valve service had been done before him but that would have been at 11-12k which seems early. "Excellent bike. I just sold my Jardine RT5 and put on a Barker's with the race ECM. WOW! What a difference...from idle up. It just runs perfectly from bottom to top. Even the idle is better.....Ebay...do it. BTW, I put in the decibel killer tube and turned the "spout" tip to face down, and it's quite acceptable. Loud but not annoying." I actually didnt like how alot of the exhausts looked and the barkers was my second choice. I ended up ordering the APH Performance Engineering exhaust. Hoping to get it this week and to have it on. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Redman1125r
| Posted on Wednesday, April 26, 2017 - 01:10 am: |
|
Make sure you get the race ecm to match the exhaust. The difference is well worth the cost and effort. Runs strong everywhere...so much better than the stock ecm. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
E30dean
| Posted on Friday, April 28, 2017 - 10:35 am: |
|
Well I ran into a small issue yesterday. I got to work and just as I turned off the engine, the speedometer shut off. I turned the key on and off and still nothing. The headlights turn on but nothing else and the bike cranks but wont start. I had the bike towed home and started digging around in the wiring. Turns out one of the wires to the ignition had come undone but it looks like it had been repaired before using a butt crimp. I ended up sodering the wires together, heat shrink wrapping it and then electrical taping all of the wires together back into the loom. My question is why just that one wire was broken in the past? I searched but couldn't find any other info. Is there a common issue with the wiring getting rubbed through in the ignition portion? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Desert_bird
| Posted on Friday, April 28, 2017 - 02:55 pm: |
|
Yep: http://www.badweatherbikers.com/buell/messages/290 431/716369.html?1373169263 If you do take to shaving it down so as to provide more clearance on full-turn, best undo and remove the the two bolts holding the fairing to the head tube. This is very easy to do. Drape a cloth underneath the fairing/ on top of the radiator-pods and let it rest there. This will give you more access to the brace so that you don't knick wires when shaving metal. Don't ask me how I know that. DB. (Message edited by Desert_bird on April 28, 2017) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
E30dean
| Posted on Friday, April 28, 2017 - 05:32 pm: |
|
Thanks for the heads up DB!! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
E30dean
| Posted on Tuesday, May 02, 2017 - 09:56 am: |
|
Well I finally had a bunch of parts come in and had some time to get the bike together. Unfortunately I only thought of taking one picture. I bought a double bubble smoked screen, clutch/brake levers, grips, tail tidy and APH Engineering exhaust. Here is how she looks now.
![](http://www.badweatherbikers.com/buell/messages/290431/805782.jpg)
|
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Chameleon
| Posted on Wednesday, May 17, 2017 - 05:05 am: |
|
Beautiful! Welcome back to the family. Heads up on your clutch cover... that's the early Rev A design I believe, which was prone to weeping fluid out the bottom which will damage the paint. Some is already visible in your last picture. The clutch slave cylinder/seal was also prone to failure, resulting in a rather sudden loss of clutch pressure... I know because it happened to me twice (Rev A, then Rev B)! Might want to look into getting that upgraded with the latest (Rev C, methinks) cover and the EBR clutch slave cylinder, if it's still available, or the aftermarket unit from Oberon, for maximum longevity and minimum problems. Recent info here: http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=290431&post=2584339#POST2584339 |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Terrys1980
| Posted on Wednesday, May 17, 2017 - 10:26 am: |
|
The slave cylinder was the reason for the leaking fluid. The cap has a hole in it to weep out of. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
E30dean
| Posted on Wednesday, May 17, 2017 - 10:38 am: |
|
Thanks for the heads up. Ive done about 500 miles so far and havent noticed any moisture near that cap so it maybe have been from before. The clutch also feels really strong. Ill just keep an eye out to see if I notice anymore leaking. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Two_seasons
| Posted on Wednesday, May 17, 2017 - 01:47 pm: |
|
I don't think you will need a new clutch cover, only the clutch slave cylinder upgrade is required to fix the "clutch weep". |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Two_seasons
| Posted on Wednesday, May 17, 2017 - 01:49 pm: |
|
By the way, a very beautiful 1125r there. And, of course, welcome back.
![](http://www.badweatherbikers.com/buell/clipart/beer.gif) |
|