| Author | Message | ||
     Stimbrell |
Does anyone know the color used on the lower forks, where they attach to the front wheel? Have searched but cannot find anything. | ||
| Terrys1980 |
Pretty sure it's designer black. Is it the same color and texture as the sub-frame rails? The only other black they used on 1125 was the Phantom Metallic. Which was wheels/frame/swingarm. | ||
| Fireboltwillie |
i just looked at a pic of my white 29...looks like cast aluminum with clear anodized finish. mine is not painted, unless it's silver and very lightly textured. | ||
| Terrys1980 |
It is powder coated. The gray is same Fluid Silver from XB frames. | ||
| Stimbrell |
Perhaps there are several different colors, mine looks like a gold or bronze, lighter than the engine though. | ||
| Stimbrell |
Here's a picture, you can see where the coating is flaking off behind the adjuster.  | ||
| Dualbuells |
You can get it here, I believe: https://sphdonline.com/ | ||
| Rogjake |
I would have it powdercoated so that it will last longer. | ||
| Stevel |
Although powder coating is superior to paint, it will require total disassembly and cleaning, because the powder must be baked at 400 degrees F. |
