Author |
Message |
Hybridmomentspass
| Posted on Wednesday, December 07, 2016 - 12:01 am: |
|
Can someone, please, post a diagram of the mounting points for the 1125 motor in the frame? Points of contact etc thanks |
Brother_in_buells
| Posted on Wednesday, December 07, 2016 - 02:37 pm: |
|
Have a look at this ,maybe it can give you the idea how it's connected!? http://www.twinmotorcycles.nl/webshop/parts.asp?mc =1&jaar=2009&model=AC6EF6AB-1FED-45F8-B607-766424B A8621&sid=6F54F972-FD07-4146-9F8C-179BD02546F3 http://www.twinmotorcycles.nl/webshop/artikel.asp? guid=YXHFSC&mc=1&aid=4563 |
Nillaice
| Posted on Wednesday, December 07, 2016 - 03:22 pm: |
|
there's K-brackets, a bolt on each side between the cylinders, and in the back. are you trying to make a crash cage or some frame sliders or something? the FSM does a pretty good job of spelling out how to separate the engine from the frame or rotate it for service ... |
Hybridmomentspass
| Posted on Wednesday, December 07, 2016 - 05:22 pm: |
|
Im thinking long-term building of a frame. I wasnt sure if it was similar to XB or tuber mounting etc |
Hybridmomentspass
| Posted on Wednesday, December 07, 2016 - 05:33 pm: |
|
I'll add to that: Im thinking of building a dragbike using 1125R motor. Thats an idea. Or just a sick power cruiser or something cool out of a bunch of Buell parts (I've been acquiring many various things - tuber, xb, 1125 - over the past year or so and could go a few different directions with the parts: things for the CURRENT dragbike, build a cool bike using an 1125 motor, or something else entirely) |
|