Author |
Message |
Roadminge
| Posted on Monday, November 28, 2016 - 08:07 am: |
|
Hi there We replaced the motor on my 2008 1125R this weekend with a new in the box 2009 motor, it was complete with its engine wiring harness. All went well the bike fired up, reset the TPS and set the AF also. We ran the motor until 200 degrees but the fans did not come on. Any ideas? the engine harness is a 2009 and the frame harness is a 2008, the ecu is a EBR race unit, the fans worked perfect on the 2008 motor |
Roadminge
| Posted on Monday, November 28, 2016 - 08:20 am: |
|
the fuse is also ok |
Nuts4mc
| Posted on Monday, November 28, 2016 - 10:38 am: |
|
wasg...RnR the ECU...maybe contact(s) aren't connecting (it's a big connector), check relays, fan connections, battery connections, check grounds - with the key on (engine not running)does the lights and horn work?...hth |
Terrys1980
| Posted on Monday, November 28, 2016 - 01:44 pm: |
|
Find Rob Weaver on Facebook. He was just having an issue with fans in this same scenario. As yes the fan circuitry is slighty different. |
Dennis_c
| Posted on Monday, November 28, 2016 - 04:07 pm: |
|
I think the fans are the same I have replaced two from the junk yard just ask for 1125 motor they both worked ok. |
Sprintst
| Posted on Monday, November 28, 2016 - 07:28 pm: |
|
ah crap, I've got a 08 harness coming for my 09............ |
|