| Author | Message | ||
     Zhen13 |
What are the differences in the subframe a between the solo tail and the two up on the S1? | ||
| Kc_zombie |
It's a bracket that slides over the rear section of the frame-a-roonie   (Message edited by kc_zombie on July 15, 2016) | ||
| Littlebuggles |
Sweet info Kc! I can use those pics to start fabricating a twin tail light assy and finally get that longer seat mounted for my daughter!! | ||
| Brother_in_buells |
Mike ,did you miss this?http://www.badweatherbikers.com/buell/messages/476 23/772308.html?1448524293 You even did send me a pm about it! | ||
| Littlebuggles |
I check up here so infrequently I loose these things quick, thank you again Mees! I'll make sure to mark and save this post to my email and should have both. | ||
| Dave |
I have the S1W in the garage with the tail section off. I have both single and twin tail brackets so I can take photos this weekend if needed. DAve | ||
| Littlebuggles |
Thanks Dave! Some top and side pics would be awesome, there's a lot of pics of the bottom, I'm unsure how much I'll need to relieve the top where it's stamped as a match for the tail grooves. | ||
| Norton952 |
If you dont mind posting them here, Or if you dont mind PM'ing me copies I surely would appreciate seeing them. I have a couple tube frame bikes and this is something I was looking at anyway of changing the style of the rear frame. Some of the Ducati tails and others look good if done right. (I have a 1998 S1, 2001 S3, and some XBs so always collecting tech materials of interest) | ||
| Dave |
Link to a shared folder. I'll add some here later. https://goo.gl/photos/XEJ31qbtbxt6cWQUA DAve (Message edited by DAve on August 06, 2016) | ||
| Littlebuggles |
Thanks Dave! |
