G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Blakeaspencer Posted on Monday, June 13, 2016 - 12:06 pm:        I'm looking for a belt tensioner or some way to tension a chain on an xb12x.   Malott442 Posted on Monday, June 13, 2016 - 06:45 pm:        Modified stock bracket, with the ebr idler and spacer. The latter two are available from ebr Hope this helps   Blakeaspencer Posted on Tuesday, June 14, 2016 - 01:18 pm:        Thanks I will look into that Matt   Malott442 Posted on Tuesday, June 14, 2016 - 05:02 pm:        G0600.07AH Idler sprocket. May or may not be 520. I'll check when I get home. G0606.07AH Idler Sprocket spacer. Here's the homemade way of turning the stock idler bracket into a tensioner:   Reepicheep Posted on Wednesday, June 15, 2016 - 07:34 am:        What are you going to do for a cush drive?   Blakeaspencer Posted on Wednesday, June 15, 2016 - 12:01 pm:        I have no clue. Do you have any suggestions with using the above setup? Or is it best to go ahead and get the spring one   Malott442 Posted on Wednesday, June 15, 2016 - 12:20 pm:        There's a solution, albeit expensive.   Reepicheep Posted on Wednesday, June 15, 2016 - 01:53 pm:        The best solution I have found for streetbikes is the Buell stock belt drive system. What are you trying to accomplish by going to a chain? On the Uly, I did have to drill out the mounting holes for the stock tensioner slightly to let it shift a little and take a little load off the belt. Otherwise I could feel it binding up under very heavy loads on big bumps, which is really bad for the 5th gear drive assembly bearings.   Skipbarberman Posted on Sunday, July 10, 2016 - 10:28 am:        I have a Free Spirits Tensioner I just posted in the classifieds. - Sean

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: