G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Nitrokeeb Posted on Monday, May 16, 2016 - 12:03 am:        Need pics of steering stops and the engine heat shield mounts (the ones behind the tail plastics). My 02 M2 is missing these parts, and if I need to fabricate them I want to know what I'm trying to replicate.   Spiderman Posted on Monday, May 16, 2016 - 09:41 am:        they used two p clamps with rubber coating on the heat shield mounts. the steering bumps looked like stepped rubber nubs that mounted to the frame where the fork tubes touched. There were no stops other than this. I do not nor could find a photo.   Hootowl Posted on Monday, May 16, 2016 - 11:24 am:        Yep, just self adhesive rubber pads, about 1/2 X 1 inch, and about an 1/8 of an inch thick.   Nitrokeeb Posted on Monday, May 16, 2016 - 09:41 pm:        Thanks!   Jim00x1 Posted on Monday, May 16, 2016 - 11:36 pm:        If you have the part number you could try looking it up here: https://shop.newcastlehd.com/catalog/parts/harley- davidson?sku=c0529.m

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: