| Author | Message | |||
     Dunlop |
Hello guys I have S1, and I am missing few screws. The problem is, in my country we are using different threads so I cant find screws that fit anywhere here. Even local shops doesnt carry these types of screws. So my question is. What thread are used on old tubers? Is it BSW (British Standard Whitworth)? The only way for me is buy them from ebay, so I dont want to order them with hit&miss method. (Message edited by Dunlop on May 08, 2016) | |||
| 651lance |
Take a look at the HD hardware list, its by parts numbers and includes some of the Buell numbers
| |||
| Court |
Peter: Can you show us which screws? They may be easier to find and describe if we know which ones. They are all common . . just a matter of sorting the correct one. | |||
| Dunlop |
For example, I need screw that holds front mudguard, one screw that holds plastic tail section on frame or even screw for leg heat guard on the right side of the bike. Screws in my country are with different threads, they are not going all the way in. | |||
| Fasted |
fender screws: 2857y (2) fender washers 6005y (2) fender locknuts 7528y (2) (Message edited by fasted on May 08, 2016) | |||
| Fasted |
heatshield screws 2609y (3) heatshield nylon washers 6035y (3) (Message edited by fasted on May 08, 2016) | |||
| S1owner |
Peter Do not use the screws you have - these are american standard threads. They will be as an example 5/16"- 18 threads per inch. If you could pm me I do have a parts manual for the bike I could send you. Also if you dont want to use ebay I could help you out these are pretty common here and usually pennies to buy and on ebay alot if times you have to buy 10 at a time. Shipping should not be too bad? I have helped a few Buellers out over the pond! Post pics of each area you need a screw for. | |||
| Fasted |
tail section screws 2609y (4) tail section nylon washers 6035y (4) tail section wellnuts 7622y (4) (Message edited by fasted on May 08, 2016) (Message edited by fasted on May 08, 2016) | |||
| Brother_in_buells |
Peter ,this is is a option to , http://www.motorcyclestorehouse.nl/home only side note ,most of screws bolts and nuts go by a minimum number of 5 pieces | |||
| Buelldualsport |
Most Frame screws are either 1/4 20 or 5/16" 18. The Battery hold down nut is a 1/4 28 thread Battery crew and a 6 mm x 10 metric Control housing screws are metric, 4 mm I believe Mirror thread are metric. Good information posted above. (Message edited by Buelldualsport on May 08, 2016) |
HD / Buell hardware list