| Author | Message | ||
     Mtjm2 |
Thanks for all your doing for us old schoolers . | ||
| Jolly |
Packages were mailed today except for two of you. Mtjm2 - please confirm your zip code - what you gave me does not match what the post office shows that it should be off of your address Brother_in_Buells - please send my your address EXACTLY as it should appear on a mailing label so that I can sort international shipping.... WHAT HARDWARE IS INCLUDED?.. 2 different sets of spacers one set short and one set longer for extra offset. I wasn't going to originally include bolts, since the cost of material went up and I wanted to keep price down I didn't include bolts...then I changed my mind.. the two bolts that secure the brace to the swing arm are longer than stock since it is a pass through hole and they will work with either set of spacers...the 1/4 20 2 inch bolts will only work if you don't use the longer spacers, fastenall was completely sold out of the 1/4 20 "2 1/4" length so they are not included in the set, however I think only a very few of you are using the pulley cover that requires the additonal offset. if you have this pulley cover you need to be able to clear the button head screws that secure the center disc to the cover, so I had longer spacers and a small spacer for the rear made to provide the extra offset.  for those of you with this pulley cover, you will have to provide your own 1/4 20 "2 1/4" bolt...sorry I tried 4 places and they did not have them or were sold out... | ||
| Brother_in_buells |
Wow it's looking great! Have send you a email with my exact address | ||
| Mtjm2 |
Pm sent . | ||
| Johnod |
Where did you get that pulley cover Jolly? | ||
| S1owner |
Looks like a crossrods from American Sport Bike | ||
| Gianni312 |
I have been trying to find a pulley cover like that one. No luck so far | ||
| S1owner |
Mine came from Al I powder coated the cap to match  | ||
| Johnod |
Thanks. Al had this to say about them fyi. The blast pulley skin fits on a 27 tooth pulley and is the same diameter: http://americansportbike.com/newdir/Item/6762 IF you have a 29 tooth pulley, it would fit, but would be a little bit smaller diameter. Al (Message edited by johnod on March 25, 2016) | ||
| Johnod |
Got mine today, absolutely a beautiful piece. Only problem is, it now makes the rest of the bike look kinda dull by comparison.  Thanks Jolly | ||
| 34nineteen |
Ok, so I read Johnod's post and had to run to the mailbox. Thanks David!!!!! Looks awesome !!!!! | ||
| Littlebuggles |
Just start pulling various bits of aluminum off and get polishing Johnod. (I did this for a few years, eventually was satisfied, then gave up on maintaining all of it.) | ||
| Buelldualsport |
Ours arrived yesterday Thanks | ||
| Jolly |
Glad you guys like them! For those that haven't received them yet you should get them today or tomorrow, except of course the one going all the way to the Netherlands! Please let me know when those arrive. | ||
| Whitetrashxb |
got mine! looks sweet! thanks! | ||
| Kc_zombie |
Received today. Suitable for framing...  | ||
| Brother_in_buells |
Mmm ,there's something weird with yours  | ||
| Jolly |
you know, I QC'd every one of these, its weird that one of them was made upside down and reversed......and the fact that I missed it...... | ||
| Kc_zombie |
Detail, details... Try standing on your head... | ||
| Kc_zombie |
 | ||
| Ltbuell |
..also depends on which side of the equator you're on..hmmmmmmm? | ||
| Mtjm2 |
Got the goods ! Now trying to sneak away with it for some ME time . | ||
| Littlebuggles |
Looks great! Mine showed up Saturday, I didn't expect such fast shipping, thanks again Jolly!! (Now I gotta wash my bike and repolish some stuff or this thing is going to look really out of place) | ||
| Ducley |
Parts received! Thank you very much! Did you get the check? | ||
| Jolly |
Ducley: PM sent/no check yet | ||
| Jolly |
Ducley: something didn't seem right, I was sure your name was in the PayPal list so I just re-checked the account, you paid with PayPal. Did you also mail a check?? | ||
| Kmbuell |
Dave, Awesome parts! Great job again. Good luck with the foot healing and moving. You like to keep covered up don't you? Kevin | ||
| Ducley |
Yeah. For the service fee. I did paypal for just the original 145. The check was for 5 or 6 bucks. BTW, now I will have to clean up whatever is underneath the cover I have now. I am sure it will be dirty. I am thinking about selling the cover I have. I will post a pic and see if anyone wants it. (Message edited by Ducley on April 01, 2016) | ||
| Brother_in_buells |
Got the package with mine today, Great pieces of art! | ||
| Jolly |
I'm actually impressed you already received it!! Good to hear everyone is happy!! Photos!?? I think I have one left if anyone wants one... |
