Author |
Message |
Gearhead
| Posted on Monday, February 29, 2016 - 08:57 pm: |
|
I'm looking for an XB12 header even if it has the typical smashed pipes from a tip over. I really just need the first 3-4" of tubing and the flange from the front cylinder for my Bonneville bike project. If you have one collecting dust, please let me know. |
Ace117
| Posted on Monday, February 29, 2016 - 09:54 pm: |
|
I have one, its not damaged but just rusted not too bad though. Ill be glad to send it your way, ill be home on leave in a couple of weeks. |
Greg_e
| Posted on Tuesday, March 01, 2016 - 06:41 am: |
|
If that's all you need, should be able to use any EVO or Twincam 88 header too. |
Firemanjim
| Posted on Monday, March 07, 2016 - 10:02 pm: |
|
I suspect I have some as well, will scrounge through shop tomorrow. |
Gearhead
| Posted on Monday, March 07, 2016 - 10:22 pm: |
|
Thanks, I'm getting closer and closer to hearing the Bonneville Buell 500 run! Now I just hope the Salt cooperates this summer. |
Doncasto
| Posted on Tuesday, March 08, 2016 - 02:14 pm: |
|
I have a header with the appropriate rear sensor hardware although I do not know it's lineage . . .
|
Greg_e
| Posted on Tuesday, March 08, 2016 - 08:57 pm: |
|
I think JP Cycles had a DIY header pipe listed pretty cheap, it was a short section of straight pipe with the header flanges on both ends, saw and weld to the rest of your system. |
Gearhead
| Posted on Tuesday, March 08, 2016 - 09:32 pm: |
|
Thanks guys, I have one coming. I wanted an XB header since they are stainless steel. |
|