Author |
Message |
Purpony
| Posted on Sunday, February 14, 2016 - 12:03 pm: |
|
decided to remake the button housings i made last year for a different setup. Changing over to Motogadget buttons. Again, these switch housing incorporate the clamps for my masters as well has the reservoir mounts (not pictured). 3D printed to test fit and all programmed to start cutting chips. debating about sending the buttons out to have them laser etched with their functions or just leave them clean and unlabeled. (Message edited by purpony on February 14, 2016) |
S1owner
| Posted on Sunday, February 14, 2016 - 12:28 pm: |
|
You know me clean! You know what the controls are makes it harder for others to take it! |
Valguard
| Posted on Monday, February 15, 2016 - 12:23 am: |
|
That is awesome. Nice work! I might have to send you a PM to see if you could make some more of those... As a side note: isn't Motogadget bad ass? I've just found out about them recently, but they have some really trick stuff. |
Court
| Posted on Monday, February 15, 2016 - 07:45 am: |
|
I'd be interested in a set for the Uly if you make them. Very cool. |
Purpony
| Posted on Monday, February 15, 2016 - 11:06 am: |
|
now in billet aluminum. yes, motogadget makes some great stuff. I have had there mini speed for a few years now. I could make more of these but right now they are designed to be the clamp of my Brembo RCS master cylinders... so it would not work on the clutch side of an OEM buell the right side OEM switch housing holds the throttle which i no longer have. (Message edited by purpony on February 15, 2016) |
Purpony
| Posted on Wednesday, February 17, 2016 - 11:00 am: |
|
all finished- front and rear housings. just deciding if i want to get them black anodized which means i need to wait for a bunch of other parts or if im going to powdercoat them to match everything else.
|
34nineteen
| Posted on Wednesday, February 17, 2016 - 11:10 am: |
|
Those are nice. Not exactly my speed, but much nicer than stock!!! |
Brother_in_buells
| Posted on Wednesday, February 17, 2016 - 05:35 pm: |
|
Marc ,you're making us all with the one-off parts you develop! |
S1owner
| Posted on Wednesday, February 17, 2016 - 08:11 pm: |
|
Then they would not be one offs! |
|