Author |
Message |
Damnut
| Posted on Monday, January 04, 2016 - 04:18 pm: |
|
Where can I find one........ ummm two actually? |
Blackm2
| Posted on Monday, January 04, 2016 - 05:15 pm: |
|
Three |
Purpony
| Posted on Monday, January 04, 2016 - 06:05 pm: |
|
someone send me one and ill make some or get me accurate measurements |
Brother_in_buells
| Posted on Monday, January 04, 2016 - 06:39 pm: |
|
http://www.badweatherbikers.com/buell/messages/476 23/727391.html?1389140262 |
Damnut
| Posted on Monday, January 04, 2016 - 06:51 pm: |
|
Well I have an S1 and an S3 that I can bring by to get measurements from if we can't find any Purpony. |
Blackm2
| Posted on Monday, January 04, 2016 - 07:58 pm: |
|
Maybe someone can contact Jeff(jefc73). He was going to have those and some Stenzil braces made earlier last year, but that thread faded away. Maybe he has dimensions he can share. I bugged him on a couple different threads but got no definitive response. |
Phelan
| Posted on Monday, January 04, 2016 - 08:28 pm: |
|
Hr had a run of the frame braces made; I bought one about 2 years ago. |
Jolly
| Posted on Monday, January 04, 2016 - 11:38 pm: |
|
I loaned mine to JeffC73 so that he could regen this part, he made a nice piece!! The machinist he used is the same guy I used for the new S2 side plates, he does outstanding work, however he is crushed for time these days! Purpony, I'd be happy to send you one if you'd like to make some up for folks.... Let's chat! |
Jefc73
| Posted on Monday, January 04, 2016 - 11:56 pm: |
|
I can check with the machinist. |
Brentx1
| Posted on Tuesday, January 05, 2016 - 12:10 am: |
|
I bought one from Jeff a few years back. I would be in for another if his machinist is willing. |
Gobadgers
| Posted on Tuesday, January 05, 2016 - 03:25 am: |
|
I received a frame brace from Jeff 2 years ago and am extremely happy with it. Jeff had a wonderful machinist make them. I too am up for a Stenzil brace if Jeff or someone else is checking into them. |
Oopezoo
| Posted on Tuesday, January 05, 2016 - 07:11 am: |
|
I would be interested in one as well if someone ends up making a few |
Johnod
| Posted on Tuesday, January 05, 2016 - 09:54 am: |
|
I'm interested. |
Blackm2
| Posted on Tuesday, January 05, 2016 - 12:42 pm: |
|
No disrespect to Jeff or his machinist, but if he is busy, and Marc(Purpony) can do it, I'd prefer Marc do it. I want to send a pulley to Marc anyway. So Jolly if you can send him one that would be most excellent. |
Ebutch
| Posted on Tuesday, January 05, 2016 - 01:24 pm: |
|
Me Toooooooooooooo |
Ebutch
| Posted on Tuesday, January 05, 2016 - 01:32 pm: |
|
This Buellty Please !!!!!!! |
Ebutch
| Posted on Tuesday, January 05, 2016 - 02:38 pm: |
|
I had no trouble installing used Bank on my S2 But prefer one above with three holes . (Message edited by ebutch on January 05, 2016) |
Phelan
| Posted on Tuesday, January 05, 2016 - 02:43 pm: |
|
Banke made a unique front steel bracket to fit their brace on S2s. Your used Banke must have came with the S2 specific bracket. S1s, S3s, and M2s use the standard front bracket. |
Ebutch
| Posted on Tuesday, January 05, 2016 - 04:33 pm: |
|
Phelan got it 3 or more yrs ago. Fuzzy trying to remember it's a ebay part not many deals now like the Past. But really like the ones Jeff had made !!!!!! |
Jefc73
| Posted on Tuesday, January 05, 2016 - 06:04 pm: |
|
I will get a hold of Gary tomorrow and see what he has going on and let everyone know. I would prefer the machinist that helped design it make more if he has the time. If not then we can go elsewhere. |
Brother_in_buells
| Posted on Tuesday, January 05, 2016 - 06:18 pm: |
|
Jeff could there also be a change on that front pulley cover you designed? |
Jefc73
| Posted on Tuesday, January 05, 2016 - 06:29 pm: |
|
Actually the pulley cover design came from Jolly. I put him in touch with my machinist and they worked out the details. |
Brother_in_buells
| Posted on Tuesday, January 05, 2016 - 06:36 pm: |
|
Oops ,i meant the drive support And yes Jolly organized these! (Message edited by Brother in buells on January 05, 2016) |
Jefc73
| Posted on Tuesday, January 05, 2016 - 06:46 pm: |
|
Just curious on how many would like one of the braces that my machinist made? May be able to persuade him better if there are at least 10. Let me know. |
Johnod
| Posted on Tuesday, January 05, 2016 - 06:53 pm: |
|
Is there a pic of the Jefc73 unit? Anyone know if they get in the way of an xb oil cooler mounted in the usual spot? |
Newmans3
| Posted on Tuesday, January 05, 2016 - 06:54 pm: |
|
I'm in for one for my S3 |
Brother_in_buells
| Posted on Tuesday, January 05, 2016 - 07:15 pm: |
|
Johnod have a look in the link on top of page! |
Johnod
| Posted on Tuesday, January 05, 2016 - 07:28 pm: |
|
Ooo nice, didn't realize that was the Jef model. Yes I'd like one. |
Johnod
| Posted on Tuesday, January 05, 2016 - 07:51 pm: |
|
I just read in one of the threads here that they don't fit the S2, so I guess I don't need one. |
Jefc73
| Posted on Tuesday, January 05, 2016 - 07:56 pm: |
|
That's funny. I have one on my red S2. Fits fine. They were designed off the Banke and changed a bit so they weren't the same. specs are the same on how they fit. (Message edited by jefc73 on January 05, 2016) |