G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Malott442 Posted on Sunday, December 20, 2015 - 11:20 am:        So, I was on a ride this morning and found my clutch kept feeling looser and looser so we detoured back to the house. Tried bleeding the clutch and a master cylinder to know avail, so I took the clutch basket apart… And found the center not was not quite finger tight ! I don't know where my service manual is due to me being a slob, so does anybody have the torque spec for the center not, and pretty much everything to put this son of a gun back together?   1313 Posted on Sunday, December 20, 2015 - 12:18 pm:        Loctite 272 and 170 Nm. Which is a shade over 125 ft. lbs. based on what the online calculator said. This should get you started, 1313   Malott442 Posted on Sunday, December 20, 2015 - 03:07 pm:        I found my manual five minutes after posting, and slung her back together. I didn't, however, use loctite due to it not being there before. I'm assuming I should go back in there and fix that, right?   Ebrfan Posted on Sunday, December 20, 2015 - 04:08 pm:        Doesn't take long, especially now that you've had some practical experience in there. Plus you can make sure that the clutch steel disks are all facing the right direction.   Snacktoast Posted on Sunday, December 20, 2015 - 04:24 pm:        You should absolutely go back and use the Loctite.   M1combat Posted on Sunday, December 20, 2015 - 04:45 pm:        You have a PM Brankin...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: